ODYSSEY X86 v2 edge platform powered by the quad-core Intel Core i3-1125G4 (11th Gen) with Intel UHD Graphics 48EUs (400–1250 MHz). Suited for edge compute, AI inference, and industrial IoT workloads.
| Pin | Type |
|---|---|
| D0RX | GPIO, UART |
| 3.3V | Power |
| D1TX | GPIO, UART |
| A0 | Analog |
| GND | Ground |
| A1 | Analog |
| D2 | GPIO |
| A2 | Analog |
| RST | Control |
| A3 | Analog |
| D4 | GPIO |
| A4 | Analog |
| D5 | GPIO |
| A5 | Analog |
| D6 | GPIO |
| SDA | I2C |
| D7 | GPIO |
| SCL | I2C |
| D8 | GPIO |
| MOSI | SPI |
| D9 | GPIO |
| CLKSCK | SPI, Signal |
| D10 | GPIO |
| MISO | SPI |
| D11 | GPIO |
| 3V3 | Power |
| D12 | GPIO |
| 5V | Power |
| D13 | GPIO |
| GND | Ground |
USB · Ethernet
Confirm the data interface matches your host board.
Module pins: 3.3V, 3V3, 5V, GND, D0/RX, D1/TX, A0, A1. Schematik maps them to your board in the app.
Full Linux or Windows on a board: Raspberry Pi 5 (8GB) to Zero 2 W, a wide range of Jetson Nano and Orin kits for CUDA vision work, x86 LattePandas — plus the coolers, antennas, and NVMe adapters keyed to each board generation.
4-Way Fast Charge Buck Module (Compatible with Raspberry Pi 4B & Jetson Nano) visual preview4-Way Fast Charge Buck Module (Compatible with Raspberry Pi 4B & Jetson Nano)
51W PoE Expansion Board for LattePanda IOTA (IEEE 802.3bt) visual preview51W PoE Expansion Board for LattePanda IOTA (IEEE 802.3bt)
7-inch Touch Display Kit for Raspberry Pi Zero visual preview7-inch Touch Display Kit for Raspberry Pi Zero
70-pin Hirose Receptacle Header for Intel Edison - 3mm Height visual preview70-pin Hirose Receptacle Header for Intel Edison - 3mm Height
Aluminum M.2 2280 SSD Heat Sink (Compatible with LattePanda Sigma) visual previewAluminum M.2 2280 SSD Heat Sink (Compatible with LattePanda Sigma)
Banana Pi DFR0326 Single-Board Computer visual previewBanana Pi DFR0326 Single-Board Computer
BeagleBone Black (BB Black) visual previewBeagleBone Black (BB Black)
CM4 Dual Gigabit Ethernet 5G/4G Base Board for Raspberry Pi CM4 visual previewCM4 Dual Gigabit Ethernet 5G/4G Base Board for Raspberry Pi CM4
CM4 to Pi 3B Adapter (B) for Raspberry Pi CM4 visual previewCM4 to Pi 3B Adapter (B) for Raspberry Pi CM4
CM4-DISP-BASE-5A: 5" Touch Screen Base for Raspberry Pi CM4 visual previewCM4-DISP-BASE-5A: 5" Touch Screen Base for Raspberry Pi CM4
CM4-ETH-RS485-BASE-B: Dual ETH + Quad Isolated RS485 for CM4 visual previewCM4-ETH-RS485-BASE-B: Dual ETH + Quad Isolated RS485 for CM4
CM4-IO-BASE-A + USB HDMI Adapter for Raspberry Pi CM4 visual previewCM4-IO-BASE-A + USB HDMI Adapter for Raspberry Pi CM4
UNIHIKER M10 - IoT Python SBC with Touchscreen visual previewPython-first Linux single-board computer with an integrated 2.8-inch touchscreen and exposed micro:bit-compatible, Gravity I2C/I/O, USB host and microSD interfaces.
Boards · Single-board computers · 1 parts
10 I/Os PLC Module - CPU Arduino Nano (Optoisolated Output) visual previewAbout 75 boards across every Arduino generation: 5V Uno/Mega/GIGA, 3.3V MKR and Portenta, plus DFRduino and Bluno compatibles. Confirm the voltage rail before stacking any shield.
Boards · Arduino boards · 77 parts
10 I/Os Relay Module - CPU ESP32 (Relay Output) visual previewWi-Fi and Bluetooth on a single chip, in every shape from Espressif DevKitC to Adafruit Feathers with STEMMA QT, DFRobot FireBeetles tuned for battery life, and Seeed XIAOs under a thumbnail.
Boards · ESP32 boards · 156 parts
15x7 CharliePlex LED Matrix FeatherWing - Cool White visual previewAbout 270 add-ons across Pi HATs, Arduino shields, and FeatherWings. The same function — motor control, PoE, display — usually ships once per host connector family. Get the host board right first.
Boards · HATs, Shields & add-ons · 270 parts