6V Air Valve with 2-pin JST XH Connector

6 V DC air/automatic bleed valve with 2-pin JST XH connector for pneumatic, inflatable, and compressed air maker projects.

Logical pinout · physical placement not verified

COIL 1
One side of the valve coil via the 2-pin JST XH-compatible connector. Drive as an inductive load with suitable flyback protection.
Type · PowerVoltage · 6V rated, source says it worked at 5V
COIL 2
Other side of the valve coil via the 2-pin JST XH-compatible connector. Polarity is not specified on the source page.
Type · PowerVoltage · Return for 6V rated coil, source says it worked at 5V

Pin	Type	Function	Voltage
COIL 1	Power	One side of the valve coil via the 2-pin JST XH-compatible connector. Drive as an inductive load with suitable flyback protection.	6V rated, source says it worked at 5V
COIL 2	Power	Other side of the valve coil via the 2-pin JST XH-compatible connector. Polarity is not specified on the source page.	Return for 6V rated coil, source says it worked at 5V

Logical pinout · physical placement not verified

Pin details

2 connections

COIL 1
One side of the valve coil via the 2-pin JST XH-compatible connector. Drive as an inductive load with suitable flyback protection.
PowerVoltage · 6V rated, source says it worked at 5V
COIL 2
Other side of the valve coil via the 2-pin JST XH-compatible connector. Polarity is not specified on the source page.
PowerVoltage · Return for 6V rated coil, source says it worked at 5V

Start wiring

5 V · 12 V · Wired

Verify supply voltage and logic levels before powering up.

Module pins: COIL 1, COIL 2. Schematik maps them to your board in the app.

Pumps & valves

40 other options

Solenoid valves (DN15/DN20 12V), 6V pneumatic air valves, push-pull and lock-style solenoids, 5V electromagnets (3–35kg holding force), 6V electric push rods (10–100mm stroke), peristaltic dosing pumps and submersible water pumps.

View all 40

Related groups

4 groups

DC motors

N20 micros in 1:50–1:298 ratios, 6V TT gearbox motors (120:1, 160RPM), 12V quadrature encoder gearmotors up to 45kg.cm, plus coreless micros, vibration discs, USB fans and a few outlier brushless motors.

Motors & actuators · DC & gear motors · 135 parts

Motor drivers

H-bridge breakouts from 1A to 43A (DRV8871, TB6612FNG, BTS7960), stepper drivers (A4988, TMC260, TB6600), I2C servo/solenoid controllers, and Pi/Arduino shields — sized by current and protocol.

Motors & actuators · Motor drivers · 77 parts

Mechanics

Robot chassis (2WD miniQ, 4WD mecanum, 6WD outdoor), mecanum wheels (48–97mm), brass hex hubs (4–6mm), shaft couplers, 2GT timing pulleys and uArm robotic arms.

Motors & actuators · Robotics & mechanics · 144 parts

Servos

9g micros and clutch PWM servos, IP67 metal servos to 35KG, and ST/SC/CF serial bus servos (2.3kg to 120kg.cm at 24V) — protocol matters as much as torque rating here.

Motors & actuators · Servos · 100 parts