7.3inch e-Paper HAT (E), 800×480, E Ink Spectra 6, SPI

7.3-inch full-color E-Ink HAT using E Ink Spectra 6 (E6) technology, 800×480, SPI interface. Optional driver HAT required for Raspberry Pi use.

Logical pinout · physical placement not verified

VCCdocumented interface
Power input for the documented Waveshare interface.
Type · Power
GNDdocumented interface
Ground return for the documented Waveshare interface.
Type · Ground
DINdocumented interface
SPI MOSI data input.
Type · SPI
CLKdocumented interface
SPI clock input.
Type · SPI
CSdocumented interface
SPI chip select.
Type · SPI
DCdocumented interface
Data/command select, low for command and high for data.
Type · GPIO
RSTdocumented interface
Reset, low active.
Type · Control
BUSYdocumented interface
Busy status output.
Type · GPIO

Pin	Position	Type	Function
VCC	documented interface	Power	Power input for the documented Waveshare interface.
GND	documented interface	Ground	Ground return for the documented Waveshare interface.
DIN	documented interface	SPI	SPI MOSI data input.
CLK	documented interface	SPI	SPI clock input.
CS	documented interface	SPI	SPI chip select.
DC	documented interface	GPIO	Data/command select, low for command and high for data.
RST	documented interface	Control	Reset, low active.
BUSY	documented interface	GPIO	Busy status output.

Logical pinout · physical placement not verified

Pin details

8 connections

VCC
Power input for the documented Waveshare interface.
Power
documented interface
GND
Ground return for the documented Waveshare interface.
Ground
documented interface
DIN
SPI MOSI data input.
SPI
documented interface
CLK
SPI clock input.
SPI
documented interface
CS
SPI chip select.
SPI
documented interface
DC
Data/command select, low for command and high for data.
GPIO
documented interface
RST
Reset, low active.
Control
documented interface
BUSY
Busy status output.
GPIO
documented interface

Start wiring

SPI · I2C · 3.3 V · Bare

Confirm the data interface matches your host board.

Module pins: VCC, GND, DIN, CLK, CS. Schematik maps them to your board in the app.

E-paper

100 other options

Waveshare makes up the large majority of parts here and often sells the same panel twice: once as a raw display needing a separate driver board, and once as a module or HAT+ with the SPI controller attached.

View all 100

Related groups

4 groups

TFT & LCD

16×2 and 20×4 character LCDs (parallel, I2C backpack, Qwiic, Grove), SPI TFTs from 0.71 to 3.5 inches, and large DSI and HDMI capacitive-touch panels up to 13.3 inches.

Displays · TFT & LCD displays · 190 parts

LED displays

Adafruit HT16K33 backpacks, MAX7219 daisy-chains, NeoPixel and DotStar grids, HUB75 RGB matrix panels, charlieplexed arrays, bare clock displays, and two VFD character modules — almost 90 parts, none wired the same way.

Displays · LED displays · 89 parts

OLED

About 30 parts: monochrome I2C modules from 0.49 to 1.3 inches, SPI/I2C grayscale and 65K-color RGB panels up to 1.5 inches, a transparent OLED, and ecosystem-specific units for Raspberry Pi, FireBeetle and M5Stack Grove.

Displays · OLED displays · 30 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts