Universal Qi Wireless Receiver Module

Qi inductive charging receiver module based on the TI BQ51013B, outputting 5V at up to 500mA. Works with any standard Qi (WPC) transmitter; connect V+ and GND wires to the project being charged.

V+
Positive 5V output from the Qi wireless receiver module. Adafruit product page says to solder two wires to the V+ and GND pins, and that the receiver manages the coil to provide 5V and 500mA.
Type · powerVoltage · 5V output, 500mA stated by Adafruit product page
GND
Ground return for the Qi wireless receiver module output. Adafruit product page says to solder two wires to the V+ and GND pins.
Type · groundVoltage · 0V

Pin	Position	Type	Function	Voltage
V+		power	Positive 5V output from the Qi wireless receiver module. Adafruit product page says to solder two wires to the V+ and GND pins, and that the receiver manages the coil to provide 5V and 500mA.	5V output, 500mA stated by Adafruit product page
GND

Start wiring

I2C · USB · 5 V · Module

Verify supply voltage and logic levels before powering up.

Module pins: V+, GND. Schematik maps them to your board in the app.

Charging

45 other options

Single-cell LiPo chargers (TP4056, MicroUSB/Type-C modules), charger/booster combos (PowerBoost 500/1000, Lipo Rider Plus 5V/2.4A), I2C fuel gauges (MAX17048, LC709203F) and Qi wireless charging coils.

View all 45

TP4056 LiPo Battery Charger Module with Protection visual preview

Related groups

4 groups

Batteries

9V alkaline cells, CR2032 coin cells, 3.7V LiPo packs (1000–1200mAh), 7.4V 2S LiPo, 18650 Li-ion holders (1–6 cells), AA/AAA holders in every configuration, and snap leads with barrel adapters.

Power · Batteries · 105 parts

Power supplies

Wall adapters (5V–24V), adjustable and fixed buck/boost/buck-boost converters (MT3608, LM2596-class), USB-C PD triggers (HUSB238), breadboard supplies, DIN-rail units and passive barrel-jack adapters.

Power · Supplies & regulators · 146 parts

Solar

Solar panels from 1.5V 250mA flexible film to 18V 10W polysilicon, MPPT solar power managers (DFRobot 5V and 9V/12V/18V, Waveshare 6V–24V), bq25185 charger boards and LTC3588 energy-harvesting breakouts.

Power · Solar power · 28 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts