RGBW Neon-like LED Flex Strip - Warm White 2700K

Addressable RGBW LED flex strip enclosed in a silicone diffusion tube that produces a continuous neon-like glow with a dedicated warm-white 2700 K channel. Requires an RGBW-capable LED controller.

Black wire (+12V)
Common positive supply wire for the RGBW neon-like LED flex strip; Adafruit states the black wire is +12V.
Type · powerVoltage · 9V to 12V; product page states 9V bright, 12V very bright
Red wire
Red LED channel cathode/control wire; Adafruit states red wire connects to ground to turn on the red colour channel.
Type · signalVoltage · low-side switched to ground
Green wire
Green LED channel cathode/control wire; Adafruit states green wire connects to ground to turn on the green colour channel.
Type · signalVoltage · low-side switched to ground
Blue wire
Blue LED channel cathode/control wire; Adafruit states blue wire connects to ground to turn on the blue colour channel.
Type · signalVoltage · low-side switched to ground
Yellow/white wire
Warm-white LED channel cathode/control wire; Adafruit states yellow/white wire connects to ground to turn on the corresponding colour channel.

LED pixels

175 other options

WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.

View all 175

Flora RGB Smart NeoPixel version 2 - Pack of 4 visual preview

Related groups

4 groups

Bare ICs

74HC logic gates, MCP3008/MCP23017 ADCs and expanders, 24LC256 EEPROM, 4N25-series optocouplers and ULN2803A drivers — bare DIP chips with no breakout-board conveniences like pull-ups or level shifting.

Components · Integrated circuits · 68 parts

Converters

ADS1115/MCP3421 ADCs, MCP4725 and GP8413 DACs, CP2102 USB-UART boards, and I2C plumbing like the LTC4316 address shifter — matched to bus, resolution and signal range.

Components · Interface converters · 115 parts

Memory

24LC32/25LC256 EEPROM, I2C FRAM, 64Mbit PSRAM, and microSD breakouts up to 64GB — matched to write frequency and data volume, not just interface.

Components · Memory & storage · 39 parts

Passives

E12 resistor kits, ceramic and electrolytic capacitor sets, 1N4148/1N4007 diodes, TIP120 Darlingtons, IRLZ44N MOSFETs and 100F supercapacitors — bench stock in kit quantities.

Components · Passives · 56 parts

Pin	Type	Function	Voltage
Black wire (+12V)	power	Common positive supply wire for the RGBW neon-like LED flex strip; Adafruit states the black wire is +12V.	9V to 12V; product page states 9V bright, 12V very bright
Red wire	signal	Red LED channel cathode/control wire; Adafruit states red wire connects to ground to turn on the red colour channel.	low-side switched to ground
Green wire	signal	Green LED channel cathode/control wire; Adafruit states green wire connects to ground to turn on the green colour channel.	low-side switched to ground
Blue wire	signal	Blue LED channel cathode/control wire; Adafruit states blue wire connects to ground to turn on the blue colour channel.	low-side switched to ground
Yellow/white wire	signal	Warm-white LED channel cathode/control wire; Adafruit states yellow/white wire connects to ground to turn on the corresponding colour channel.	low-side switched to ground

Pinout

Bare ICs

Converters

Memory

Passives