
USB-C port used for powering and programming; USB power charges the LiPoly battery when connected.
JST 2-PH connector for a 3.7/4.2V LiPoly battery; powers the Feather and charges from USB.
Common ground for power and logic.
Positive voltage to/from the 2-pin JST battery jack.
Positive voltage to/from the USB-C jack when USB is connected.
Wi-Fi and Bluetooth on a single chip, in every shape from Espressif DevKitC to Adafruit Feathers with STEMMA QT, DFRobot FireBeetles tuned for battery life, and Seeed XIAOs under a thumbnail.
10 I/Os PLC Module - CPU Arduino Nano (Optoisolated Output) visual preview
10 I/Os Relay Module - CPU Arduino Nano (Relay Output) visual preview
Adafruit METRO 328 - Arduino Compatible - with Headers visual preview
Adafruit Metro Mini 328 V2 - Arduino-Compatible - 5V 16MHz [STEMMA QT / Qwiic] visual previewAbout 75 boards across every Arduino generation: 5V Uno/Mega/GIGA, 3.3V MKR and Portenta, plus DFRduino and Bluno compatibles. Confirm the voltage rail before stacking any shield.
Boards · Arduino boards · 76 parts
15x7 CharliePlex LED Matrix FeatherWing - Cool White visual preview
15x7 CharliePlex LED Matrix FeatherWing - Warm White visual preview
16-Ch High Current Driver Shield Kit v2 visual preview
19V 90W AC/DC Adapter for LattePanda Mu Full-Function EVA Carrier Board visual previewAbout 270 add-ons across Pi HATs, Arduino shields, and FeatherWings. The same function — motor control, PoE, display — usually ships once per host connector family. Get the host board right first.
Boards · HATs, Shields & add-ons · 272 parts
:MOVE mini MK2 buggy kit visual preview
:VIEW text32 LCD Screen for the BBC micro:bit visual preview
16-Ch Servo Driver Breakout for micro:bit, I2C visual preview
2x40 Right Angle Edge Connector for micro:bit visual previewSpecialists: Teensy for high-clock audio and USB, Adafruit SAMD boards running CircuitPython or the Arduino IDE, proper STM32 eval kits, and the micro:bit classroom ecosystem. Schematik builds target ESP32, Arduino Uno, and Pico; come here when you have a specific reason to.
Boards · Other MCU boards · 226 parts
Adafruit DVI Breakout Board for HDMI Source Devices visual preview
Adafruit DVI Sock for Pico - Works with HDMI Displays visual preview
Adafruit Feather RP2040 with DVI Output Port - Works with HDMI visual preview
Adafruit MACROPAD RP2040 Bare Bones - 3x4 Keys + Encoder + OLED visual previewThe Raspberry Pi MCU line — Pico, Pico 2, and third-party boards on the same silicon — plus a deep bench of Pico-pinout displays, loggers, and radio modules that do nothing without a Pico plugged in.
Boards · Pico & RP2040 boards · 44 parts
3.3V regulator enable; pulled up, connect to ground to disable the regulator.
Output from the 3.3V regulator.
SPI clock pin on the ESP32-S3 high-speed peripheral.
SPI microcontroller-out / sensor-in pin.
SPI microcontroller-in / sensor-out pin.
UART receive pin; connect to TX on a sensor or breakout.
UART transmit pin; connect to RX on a sensor or breakout.
I2C clock pin shared with the STEMMA QT connector; Adafruit states a 5k pull-up is present.
I2C data pin shared with the STEMMA QT connector; Adafruit states a 5k pull-up is present.
JST SH 4-pin STEMMA QT connector breaking out I2C: SCL, SDA, 3.3V, and GND.
Digital pins; D5, D6, D9 and D10 are on ADC1, D11-D13 are on ADC2.
Six analogue-capable pins; A0 through A4 on ADC2 and A5 on ADC1. Adafruit notes no true analogue output DAC.
On-board addressable RGB NeoPixel LED available as board.NEOPIXEL / PIN_NEOPIXEL.
On-board red LED labelled #13, controllable as board.LED / LED_BUILTIN / 13.
| Pin | Position | Type | Function | Voltage |
|---|---|---|---|---|
| USB-C | power-data | USB-C port used for powering and programming; USB power charges the LiPoly battery when connected. | USB 5V input/output rail via USB jack, per Adafruit Learn. | |
| LiPoly JST | power | JST 2-PH connector for a 3.7/4.2V LiPoly battery; powers the Feather and charges from USB. | 3.7/4.2V LiPoly battery, 250mAh or larger, per Adafruit Learn. | |
| GND | ground | Common ground for power and logic. | 0V reference. | |
| BAT | power | Positive voltage to/from the 2-pin JST battery jack. | Battery positive rail from optional LiPoly cell. | |
| USB | power | Positive voltage to/from the USB-C jack when USB is connected. | USB positive rail. | |
| EN | control | 3.3V regulator enable; pulled up, connect to ground to disable the regulator. | 3.3V regulator enable logic. | |
| 3.3V | power | Output from the 3.3V regulator. | 3.3V output, 500mA peak per Adafruit Learn. | |
| SCK | spi | SPI clock pin on the ESP32-S3 high-speed peripheral. | 3.3V logic. | |
| MOSI | spi | SPI microcontroller-out / sensor-in pin. | 3.3V logic. | |
| MISO | spi | SPI microcontroller-in / sensor-out pin. | 3.3V logic. | |
| RX | uart | UART receive pin; connect to TX on a sensor or breakout. | 3.3V logic. | |
| TX | uart | UART transmit pin; connect to RX on a sensor or breakout. | 3.3V logic. | |
| SCL | i2c | I2C clock pin shared with the STEMMA QT connector; Adafruit states a 5k pull-up is present. | 3.3V logic with pull-up. | |
| SDA | i2c | I2C data pin shared with the STEMMA QT connector; Adafruit states a 5k pull-up is present. | 3.3V logic with pull-up. | |
| STEMMA QT | i2c-connector | JST SH 4-pin STEMMA QT connector breaking out I2C: SCL, SDA, 3.3V, and GND. | 3.3V I2C connector. | |
| D5-D6 / D9-D13 | gpio | Digital pins; D5, D6, D9 and D10 are on ADC1, D11-D13 are on ADC2. | 3.3V logic. | |
| A0-A5 | analog | Six analogue-capable pins; A0 through A4 on ADC2 and A5 on ADC1. Adafruit notes no true analogue output DAC. | 3.3V ADC input domain. | |
| NEOPIXEL | indicator | On-board addressable RGB NeoPixel LED available as board.NEOPIXEL / PIN_NEOPIXEL. | On-board 3.3V controlled LED. | |
| LED / #13 | indicator | On-board red LED labelled #13, controllable as board.LED / LED_BUILTIN / 13. | On-board 3.3V controlled LED. |