3-wire analogue anemometer powered from 7–24 V DC; outputs 0.4 V at 0 m/s rising to 2.0 V at 32.4 m/s on the signal wire. Weatherproof housing with a twist-lock connector for outdoor installation.
Power and signal ground. Source says connect the black wire to power and signal ground.
Positive supply input. Source says connect the brown wire to 7 to 24 VDC.
Analogue wind-speed output. Source says measure the analogue voltage on the blue wire.
| Pin | Type | Function | Voltage |
|---|---|---|---|
| Black wire | Ground | Power and signal ground. Source says connect the black wire to power and signal ground. | 0 V reference / ground |
| Brown wire | Power | Positive supply input. Source says connect the brown wire to 7 to 24 VDC. | 7 to 24 VDC |
| Blue wire | Signal | Analogue wind-speed output. Source says measure the analogue voltage on the blue wire. | 0.4 V at 0 m/s to 2.0 V at 32.4 m/s |
Power and signal ground. Source says connect the black wire to power and signal ground.
Positive supply input. Source says connect the brown wire to 7 to 24 VDC.
Analogue wind-speed output. Source says measure the analogue voltage on the blue wire.
Single data line · Analog · I2C · 3.3 – 5 V · Breakout
Verify supply voltage and logic levels before powering up.
Module pins: Brown wire, Black wire, Blue wire. Schematik maps them to your board in the app.
Analog and digital anemometers, a tipping-bucket rain gauge, RS485 solar radiation and PAR probes, the AS3935 lightning detector, an airspeed sensor and multi-sensor HATs for outdoor weather monitoring.
Anemometer Wind Speed Sensor (0~5V, 0~30m/s, IP65) visual previewAnemometer Wind Speed Sensor (0~5V, 0~30m/s, IP65)
Environment Sensor HAT for Raspberry Pi visual previewEnvironment Sensor HAT for Raspberry Pi
Environment Sensor Module for Jetson Nano visual previewEnvironment Sensor Module for Jetson Nano
Environment Sensor Module for Raspberry Pi Pico visual previewEnvironment Sensor Module for Raspberry Pi Pico
Gravity: Lightning Distance Sensor visual previewGravity: Lightning Distance Sensor
Gravity: PAV3015 Air Velocity Sensor (0-15 m/s, I2C) visual previewGravity: PAV3015 Air Velocity Sensor (0-15 m/s, I2C)
Gravity: Tipping Bucket Rainfall Sensor - I2C & UART visual previewGravity: Tipping Bucket Rainfall Sensor - I2C & UART
Lark Weather Station Pro visual previewLark Weather Station Pro
Pixhawk4 Digital Air Speed Sensor visual previewPixhawk4 Digital Air Speed Sensor
Pysense Sensor Shield visual previewPysense Sensor Shield
RS485 Photoelectric Solar Radiation Sensor (400-1100nm) visual previewRS485 Photoelectric Solar Radiation Sensor (400-1100nm)
RS485 Photosynthetically Active Radiation (PAR) Sensor (400-700nm) visual previewRS485 Photosynthetically Active Radiation (PAR) Sensor (400-700nm)
BOSON: Heart Rate Monitor Sensor i20 visual previewUART/I2C fingerprint modules, MAX30102 PPG breakouts, and analog ECG/EMG front-ends for access control and hobby biometric sensing.
Sensors · Biometric sensors · 26 parts
0.3M Pixel Serial JPEG Camera Module visual previewPi CSI modules, USB cameras, MCU-class OV2640/OV5640 boards, on-camera AI like HuskyLens and OpenMV, and thermal or ToF imagers — over 130 listings across very different pipelines.
Sensors · Cameras & vision · 141 parts
0.28 Inch LED Digital DC Voltmeter - Green visual previewINA-series I2C monitors, Hall-effect sensors like the ACS723 and Gravity 20A/50A boards, and non-invasive CT clamps for everything from 3.3V rail telemetry to mains current sensing.
Sensors · Current & voltage · 25 parts
25m Long Distance ToF Laser Sensor (±3cm Accuracy, 100Hz, 100K LUX Resistant) visual previewAbout 180 listings spanning VL53-series ToF breakouts, HC-SR04 and MaxSonar ultrasonics, 360° triangulation LiDARs, IR proximity sensors, 24GHz mmWave presence detection and laser break-beam sensors.
Sensors · Distance sensors · 177 parts