Breadboard-Friendly Mini PIR Motion Sensor with 3-Pin Header

Breadboard-Friendly Mini PIR Motion Sensor with 3-Pin Header — Adafruit — 4871

Self-contained miniature PIR motion sensor with 3-pin header for breadboard or perfboard use. Needs only power and ground; detects motion to ~5m.

Pinout

Logical pinout · physical placement not verified
BREADBOARD-FRIENDLY MIGNDVCCOUT
  • GND1

    Pin #1 ground. Adafruit product page says there is a tiny minus sign next to this pin.

    Type · Ground
  • OUT2

    Pin #2 output signal. Adafruit product page says the output goes high when motion is detected and stays high for about 2 seconds.

    Type · SignalVoltage · Digital output is 3.3V high/low, per Adafruit product page.
  • VCC3

    Pin #3 power. Adafruit product page says there is a tiny plus sign next to this pin and the module has an onboard regulator.

    Type · PowerVoltage · Power from 3 to 12V DC, per Adafruit product page.

Start wiring

Analog · I2C · UART · 3.3 – 5 V · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: VCC, GND, OUT. Schematik maps them to your board in the app.

Other sensors

62 other options

PIR and mmWave presence sensors, Hall-effect and angle encoders, piezo vibration discs, gesture breakouts and more — grouped here because they fit nowhere else.

View all 62

Related groups

4 groups