Gravity: Analog Ambient Light Sensor (1~6000 Lux)

Gravity: Analog Ambient Light Sensor (1~6000 Lux) — DFRobot — DFR0026

Analog ambient light sensor with 1–6000 lux range, outputting a voltage signal proportional to light density. Compatible with Arduino and other ADC-capable platforms; requires an external ADC for Raspberry Pi.

Pinout

Logical pinout · physical placement not verified
GRAVITY: ANALOG AMBIENGREENBLACKRED
  • GREENOfficial table 2 row 1

    S

    Type · Unknown
  • REDOfficial table 2 row 2

    VCC

    Type · Power
  • BLACKOfficial table 2 row 3

    GND

    Type · Ground

Start wiring

I2C · Analog · 3.3 – 5 V · Breakout

Adafruit describes the CdS photoresistor as a light sensor whose resistance falls as light increases, and its product page gives an examp…

Module pins: RED, BLACK. Schematik maps them to your board in the app.

Light & color

79 other options

CdS photoresistors, I2C lux sensors like VEML7700 and TSL2591, multi-channel spectral sensors, UV detectors and TCS-series color sensors — about 80 listings for anything that responds to photons.

View all 79

Related groups

4 groups