Gravity: Digital IR Receiver Module

Gravity: Digital IR Receiver Module — DFRobot — DFR0094

38 kHz infrared receiver module with a Gravity digital connector, operating at 5 V. Outputs a decoded digital signal for standard IR remote control protocols. Pair with the Gravity IR Transmitter (DFR0095) for full send/receive setups.

Pinout

Logical pinout · physical placement not verified
GRAVITY: DIGITAL IR REDGNDVCC
  • D

    Digital IR receiver output signal; DFRobot wiki specifies the module interface as Digital.

    Type · SignalVoltage · 5V module power; digital output for Arduino/Gravity interface.
  • VCC

    Power input for the Gravity digital IR receiver module.

    Type · PowerVoltage · 5V, per DFRobot wiki Power Supply spec.
  • GND

    Ground reference for the Gravity digital IR receiver module.

    Type · GroundVoltage · 0V

Start wiring

Single data line · I2C · 3.3 – 5 V · Breakout

Confirm the data interface matches your host board.

Module pins: VCC, GND, D. Schematik maps them to your board in the app.

Infrared

21 other options

TSOP38238 and TSMP96000 for remote-control receive and learn, Adafruit STEMMA IR transceiver for send/receive, IR break-beam and photoelectric switches for presence, and Grove/M5Stack MLX90614 modules for contactless temperature.

View all 21

Related groups

4 groups