Gravity: Digital IR Transmitter Module

Gravity: Digital IR Transmitter Module — DFRobot — DFR0095

38 kHz infrared LED transmitter module with a Gravity digital connector, operating at 5 V. Emits IR pulses for wireless remote-control signals; requires line-of-sight to the receiver. Designed to pair with the Gravity IR Receiver (DFR0094).

Pinout

Logical pinout · physical placement not verified
GRAVITY: DIGITAL IR TRGNDDVCC
  • GNDOfficial table 2 row 1

    GND

    Type · Ground
  • VCCOfficial table 2 row 2

    VCC

    Type · Power
  • DOfficial table 2 row 3

    Digital Input; HIGH=open emission, LOW=close emission

    Type · GPIO

Start wiring

Single data line · I2C · 3.3 – 5 V · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: VCC, GND. Schematik maps them to your board in the app.

Infrared

21 other options

TSOP38238 and TSMP96000 for remote-control receive and learn, Adafruit STEMMA IR transceiver for send/receive, IR break-beam and photoelectric switches for presence, and Grove/M5Stack MLX90614 modules for contactless temperature.

View all 21

Related groups

4 groups