DFRobot μHex Low Power Controller (DFR0343)

DFRobot μHex Low Power Controller (DFR0343) — DFRobot — DFR0343

Hexagonal ATmega328P board running at 8 MHz on 2.7–5 V, with 14 digital and 6 analog GPIO and 4 switchable power ports to cut supply to peripherals. Targets battery-powered applications; sleep current drops to 0.12 µA at 3.3 V (watchdog off), giving roughly 60 days on a CR2032.

Pinout

Logical pinout · physical placement not verified
DFROBOT ΜHEX LOW POWERRXA2TXA32SDA3SCL5DTR9+10-11A0Power inA1Power out
  • RX
    Type · UART
  • TX
    Type · UART
  • 2
    Type · Signal
  • 3
    Type · Signal
  • 5
    Type · Signal
  • 9
    Type · Signal
  • 10
    Type · Signal
  • 11
    Type · Signal
  • A0
    Type · Analog
  • A1
    Type · Analog
  • A2
    Type · Analog
  • A3
    Type · Analog
  • SDA
    Type · I2C
  • SCL
    Type · I2C
  • DTR
    Type · Signal
  • +
    Type · Power
  • -
    Type · Ground
  • Type · Power
  • Power in
    Type · Power
  • Power out
    Type · Power

Start wiring

USB · 3.3 V

Confirm the data interface matches your host board.

Module pins: +, ⊕, Power in, Power out, -, RX, TX, 2. Schematik maps them to your board in the app.

Other MCUs

228 other options

Specialists: Teensy for high-clock audio and USB, Adafruit SAMD boards running CircuitPython or the Arduino IDE, proper STM32 eval kits, and the micro:bit classroom ecosystem. Schematik builds target ESP32, Arduino Uno, and Pico; come here when you have a specific reason to.

View all 228

Related groups

4 groups