GDA-HLB1 Basic Adapter for Gicren Devices

GDA-HLB1 Basic Adapter for Gicren Devices — DFRobot — DFR0345

Adapter board with multiple pin connectors, a fuse, and selectable resistor for interfacing Gicren servo controllers. Compatibility limited to specified Gicren controller models.

Pinout

Logical pinout · physical placement not verified
GDA-HLB1 BASIC ADAPTERMultiple pin connectorsFuseresistor select
  • Multiple pin connectors
    Type · Signal
  • Fuseresistor select
    Type · Signal

Start wiring

PWM · UART · Wide input · Wired

Some modules need I2C or signal pull-ups — check the datasheet.

Module pins: Multiple pin connectors, Fuse / resistor select. Schematik maps them to your board in the app.

Servos

99 other options

9g micros and clutch PWM servos, IP67 metal servos to 35KG, and ST/SC/CF serial bus servos (2.3kg to 120kg.cm at 24V) — protocol matters as much as torque rating here.

View all 99

Related groups

4 groups