32x16 RGB LED Matrix Panel (6mm pitch)

512-pixel RGB LED matrix panel, 32x16 at 6 mm pitch, requiring 13 GPIOs and 5V/2A. Cascadeable; suitable for indoor and outdoor signage with compatible high-performance controllers.

Logical pinout · physical placement not verified

VCC
Type · Power
GND
Type · Ground
R1
Type · Signal
G1
Type · Signal
B1
Type · Signal
R2
Type · Signal
G2
Type · Signal
B2
Type · Signal
A
Type · Control
B
Type · Control
C
Type · Control
D
Type · Control
CLK
Type · Control
LAT
Type · Control
OE
Type · Control

Pin	Type
VCC	Power
GND	Ground
R1	Signal
G1	Signal
B1	Signal
R2	Signal
G2	Signal
B2	Signal
A	Control
B	Control
C	Control
D	Control
CLK	Control
LAT	Control
OE	Control

Logical pinout · physical placement not verified

Pin details

15 connections

VCC
Power
GND
Ground
R1
Signal
G1
Signal
B1
Signal
R2
Signal
G2
Signal
B2
Signal
A
Control
B
Control
C
Control
D
Control
CLK
Control
LAT
Control
OE
Control

Start wiring

I2C · SPI · Single data line · 5 V · 3.3 – 5 V · Bare

Verify supply voltage and logic levels before powering up.

Module pins: VCC, GND, R1, G1, B1, R2, G2, B2. Schematik maps them to your board in the app.

LED displays

88 other options

Adafruit HT16K33 backpacks, MAX7219 daisy-chains, NeoPixel and DotStar grids, HUB75 RGB matrix panels, charlieplexed arrays, bare clock displays, and two VFD character modules — almost 90 parts, none wired the same way.

View all 88

Related groups

4 groups

TFT & LCD

16×2 and 20×4 character LCDs (parallel, I2C backpack, Qwiic, Grove), SPI TFTs from 0.71 to 3.5 inches, and large DSI and HDMI capacitive-touch panels up to 13.3 inches.

Displays · TFT & LCD displays · 190 parts

E-paper

Waveshare makes up the large majority of parts here and often sells the same panel twice: once as a raw display needing a separate driver board, and once as a module or HAT+ with the SPI controller attached.

Displays · E-paper displays · 101 parts

OLED

About 30 parts: monochrome I2C modules from 0.49 to 1.3 inches, SPI/I2C grayscale and 65K-color RGB panels up to 1.5 inches, a transparent OLED, and ecosystem-specific units for Raspberry Pi, FireBeetle and M5Stack Grove.

Displays · OLED displays · 30 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts

Pinout