micro:Driver Expansion Board for micro:bit / UNIHIKER (DFR0548)

micro:Driver Expansion Board for micro:bit / UNIHIKER (DFR0548) — DFRobot — DFR0548

Expansion board (63×58 mm) for micro:bit, UNIHIKER M10, and K10 adding 4 DC motor channels (HR8833, 1.5 A continuous each, also usable as 2 stepper channels), 8 servo interfaces, and 9 GPIO pins via dual I2C control. Powered from 3.5–5.5 V via DC 2.1 connector.

Pinout

Logical pinout · physical placement not verified
MICRO:DRIVER EXPANSIONServo interfaces (8)DC 2.1 powerGPIO (9)GNDI2Cmicro:bitUNIHIKER edge
  • Servo interfaces (8)
    Type · Control
  • GPIO (9)
    Type · Signal
  • I2C
    Type · Signal
  • DC 2.1 power
    Type · Power
  • GND
    Type · Ground
  • micro:bitUNIHIKER edge
    Type · Signal

Start wiring

USB · 3.3 V

Confirm the data interface matches your host board.

Module pins: DC 2.1 power, GND, GPIO (9), I2C, micro:bit / UNIHIKER edge. Schematik maps them to your board in the app.

Other MCUs

228 other options

Specialists: Teensy for high-clock audio and USB, Adafruit SAMD boards running CircuitPython or the Arduino IDE, proper STM32 eval kits, and the micro:bit classroom ecosystem. Schematik builds target ESP32, Arduino Uno, and Pico; come here when you have a specific reason to.

View all 228

Related groups

4 groups