Gravity: Analog SHT30 Temperature & Humidity Sensor

Gravity: Analog SHT30 Temperature & Humidity Sensor — DFRobot — DFR0588

Analog-output temperature and humidity sensor based on the SHT30, with fast response and high precision. Operates on 3.3V or 5V; outputs two analog voltages for direct ADC reading.

Pinout

Logical pinout · physical placement not verified
GRAVITY: ANALOG SHT30 -T+/RH
  • -Official table 2 row 1

    Power GND

    Type · Ground
  • +Official table 2 row 2

    Power VCC(3.3~5.5V)

    Type · Power
  • RHOfficial table 2 row 3

    Relative humidity analog output (0.3-2.7V)

    Type · Analog
  • TOfficial table 2 row 4

    Temperature analog output (0.3-2.7V)

    Type · Analog
  • /Official table 2 row 5

    2.54mm-4P via pinout

    Type · Unknown

Start wiring

I2C · SPI · Single data line · 3.3 – 5 V · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: +, -, RH, T. Schematik maps them to your board in the app.

Temp & humidity

165 other options

DHT/AHT sensors, SHT-series humidity chips, BMP and LPS barometers, BME combined sensors, DS18B20 probes, thermocouple amplifiers and non-contact MLX IR sensors — about 165 listings, very different accuracy classes.

View all 165

Related groups

4 groups