DHT22 temperature-humidity sensor

DHT22 temperature-humidity sensor — ASAIR — 385

Single-wire capacitive humidity and thermistor temperature sensor outputting calibrated digital data. Readings update at most once every 2 seconds; not Dallas 1-Wire compatible — each sensor needs its own data pin.

Pinout

Logical pinout · physical placement not verified
DHT22 TEMPERATURE-HUMIVCCNCDATAGND
  • VCC4-pin DHT body / wired lead

    Power input; pin 1 from left on bare sensor, red wire on wired sensor

    Type · PowerVoltage · 3.3-5V
  • DATA4-pin DHT body / wired lead

    Single-wire digital data output; pin 2, white or yellow wire

    Type · SignalVoltage · 3-5V logic
  • NC4-pin DHT body

    Not connected; ignore pin 3 on 4-pin DHT body

    Type · Control
  • GND4-pin DHT body / wired lead

    Ground; pin 4 from left on bare sensor, black wire on wired sensor

    Type · GroundVoltage · 0V

Start wiring

I2C · SPI · Single data line · 3.3 – 5 V · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: VCC, GND, DATA. Schematik maps them to your board in the app.

Temp & humidity

165 other options

DHT/AHT sensors, SHT-series humidity chips, BMP and LPS barometers, BME combined sensors, DS18B20 probes, thermocouple amplifiers and non-contact MLX IR sensors — about 165 listings, very different accuracy classes.

View all 165

Related groups

4 groups