DRV8830 DC Motor Driver Breakout

DRV8830 DC Motor Driver Breakout — Pimoroni — 0606034880153

I2C H-bridge motor driver (DRV8830) for single DC motors at 3–6 V. Selectable current limit (0.2 A or 1 A via solder pads) and up to four I2C addresses (0x60/0x61/0x63/0x64) for multi-motor builds. Includes reverse polarity protection and status LED.

Pinout

Logical pinout · physical placement not verified
DRV8830 DC MOTOR DRIVEVCCSCLGNDMotor +- or ABSDA
  • VCC
    Type · Power
  • GND
    Type · Ground
  • SDA
    Type · I2C
  • SCL
    Type · I2C
  • Motor +- or AB
    Type · Power

Start wiring

PWM · I2C · UART · Wide input · Breakout

Confirm the data interface matches your host board.

Module pins: VCC, Motor +/- or A/B, GND, SDA, SCL. Schematik maps them to your board in the app.

Motor drivers

76 other options

H-bridge breakouts from 1A to 43A (DRV8871, TB6612FNG, BTS7960), stepper drivers (A4988, TMC260, TB6600), I2C servo/solenoid controllers, and Pi/Arduino shields — sized by current and protocol.

View all 76

Related groups

4 groups