Build Season 2026 is live: Publish a build to win M5Stack hardwareBuild Season 2026 is live

Adafruit E-Ink Bonnet for Raspberry Pi - 24-pin E-Paper Displays

Adafruit E-Ink Bonnet for Raspberry Pi - 24-pin E-Paper Displays — Adafruit — 6418
STEP
Availability
In stock

Raspberry Pi bonnet for standard 24-pin E-Paper displays, with 2x20 GPIO connection, STEMMA QT I2C, STEMMA 3-pin GPIO, user buttons, and a MAX98357 I2S mono speaker amplifier.

Pinout

Logical pinout · physical placement not verified
ADAFRUIT E-INK BONNET 2x20 Raspberry Pi GPIO headerReset24-pin E-Paper flex connectorBusyMOSISTEMMA QTMISOBCLKLRCLKDINSCKSpeaker terminal blockCSRESE resistor switchDC

One grouped source record is expanded into separate logical pads where unambiguous; physical placement is not implied.

  • 2x20 Raspberry Pi GPIO header
    Type · Unknown
  • 24-pin E-Paper flex connector
    Type · Unknown
  • MOSIMISOSCK
    Type · SPI
  • CS
    Type · SPI
  • DC
    Type · GPIO
  • Reset
    Type · Control
  • Busy
    Type · GPIO
  • STEMMA QT
    Type · I2C
  • BCLKLRCLKDIN
    Type · Unknown
  • Speaker terminal block
    Type · GPIO
  • RESE resistor switch
    Type · Unknown

Start wiring

SPI · I2C · 3.3 V · Bare

Confirm the data interface matches your host board.

Module pins: MOSI / MISO / SCK, CS, STEMMA QT. Schematik maps them to your board in the app.

E-paper

100 other options

Waveshare makes up the large majority of parts here and often sells the same panel twice: once as a raw display needing a separate driver board, and once as a module or HAT+ with the SPI controller attached.

View all 100

Related groups

4 groups

TFT & LCD

16×2 and 20×4 character LCDs (parallel, I2C backpack, Qwiic, Grove), SPI TFTs from 0.71 to 3.5 inches, and large DSI and HDMI capacitive-touch panels up to 13.3 inches.

Displays · TFT & LCD displays · 190 parts

LED displays

Adafruit HT16K33 backpacks, MAX7219 daisy-chains, NeoPixel and DotStar grids, HUB75 RGB matrix panels, charlieplexed arrays, bare clock displays, and two VFD character modules — almost 90 parts, none wired the same way.

Displays · LED displays · 89 parts

OLED

About 30 parts: monochrome I2C modules from 0.49 to 1.3 inches, SPI/I2C grayscale and 65K-color RGB panels up to 1.5 inches, a transparent OLED, and ecosystem-specific units for Raspberry Pi, FireBeetle and M5Stack Grove.

Displays · OLED displays · 30 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts