Adafruit Feather M0 WiFi w/ATWINC1500 + uFL

Adafruit Feather M0 WiFi w/ATWINC1500 + uFL — Adafruit — 0704256796099

Feather board combining ATSAMD21 Cortex-M0 with an ATWINC1500 Wi-Fi module and u.FL antenna connector. Includes USB and LiPo charging. The uFL connector allows external antenna for improved range vs. the PCB-trace antenna variant.

Pinout

  • SPI
  • Signal

One grouped source record remains in the details; diagram pads use verified individual pin evidence.

  • GPIO #0-#13, A0-A5, SCKMOSIMISOlogic pins
    Type · SPI, Signal

Start wiring

USB · 3.3 V

Verify supply voltage and logic levels before powering up.

Module pins: GND / BAT / USB / EN / 3V / RST / ARef, GPIO #0-#13, A0-A5, SCK/MOSI/MISO, ATWINC1500 specific (CS, IRQ, RST, uFL antenna). Schematik maps them to your board in the app.

Other MCUs

228 other options

Specialists: Teensy for high-clock audio and USB, Adafruit SAMD boards running CircuitPython or the Arduino IDE, proper STM32 eval kits, and the micro:bit classroom ecosystem. Schematik builds target ESP32, Arduino Uno, and Pico; come here when you have a specific reason to.

View all 228

Related groups

4 groups