Flexible 8x32 NeoPixel RGB LED Matrix

256-pixel flexible NeoPixel LED matrix, 8x32 arrangement on a bendable PCB backing, individually addressable via a single data pin. Can be curved around surfaces; suitable for wearables or non-flat installations.

+5V
NeoPixel matrix power input. Adafruit product page says to use a 5V supply for the flexible 8x32 NeoPixel matrix; NeoPixel Uberguide identifies +5V as one of the three NeoPixel inputs.
Type · powerVoltage · 5V typical NeoPixel supply; product page warns current can exceed 15A at full white and recommends keeping draw under 5A.
GND
Ground return for matrix power and shared microcontroller reference. NeoPixel Uberguide says the three inputs are +5V, ground, and data, with GND shared between the supply and controller.
Type · groundVoltage · 0V reference
DIN / DI
NeoPixel data input at the input end of the matrix. The Uberguide identifies DIN or DI as data input and says NeoPixel data moves in the indicated direction.
Type · signal
DOUT / DO
Optional NeoPixel data output at the end of the chain for adding more pixels. The Uberguide says DOUT or DO can be left unconnected if not chaining.
Type · signal

Pin	Type	Function	Voltage
+5V	power	NeoPixel matrix power input. Adafruit product page says to use a 5V supply for the flexible 8x32 NeoPixel matrix; NeoPixel Uberguide identifies +5V as one of the three NeoPixel inputs.	5V typical NeoPixel supply; product page warns current can exceed 15A at full white and recommends keeping draw under 5A.
GND	ground	Ground return for matrix power and shared microcontroller reference. NeoPixel Uberguide says the three inputs are +5V, ground, and data, with GND shared between the supply and controller.	0V reference
DIN / DI	signal	NeoPixel data input at the input end of the matrix. The Uberguide identifies DIN or DI as data input and says NeoPixel data moves in the indicated direction.
DOUT / DO	signal	Optional NeoPixel data output at the end of the chain for adding more pixels. The Uberguide says DOUT or DO can be left unconnected if not chaining.

Start wiring

I2C · SPI · Single data line · 5 V · 3.3 – 5 V · Bare

Confirm the data interface matches your host board.

Module pins: +5V, GND, DIN / DI, DOUT / DO. Schematik maps them to your board in the app.

LED displays

87 other options

Adafruit HT16K33 backpacks, MAX7219 daisy-chains, NeoPixel and DotStar grids, HUB75 RGB matrix panels, charlieplexed arrays, bare clock displays, and two VFD character modules — almost 90 parts, none wired the same way.

View all 87

Related groups

4 groups

TFT & LCD

16×2 and 20×4 character LCDs (parallel, I2C backpack, Qwiic, Grove), SPI TFTs from 0.71 to 3.5 inches, and large DSI and HDMI capacitive-touch panels up to 13.3 inches.

Displays · TFT & LCD displays · 186 parts

E-paper

Waveshare makes up the large majority of parts here and often sells the same panel twice: once as a raw display needing a separate driver board, and once as a module or HAT+ with the SPI controller attached.

Displays · E-paper displays · 102 parts

OLED

About 30 parts: monochrome I2C modules from 0.49 to 1.3 inches, SPI/I2C grayscale and 65K-color RGB panels up to 1.5 inches, a transparent OLED, and ecosystem-specific units for Raspberry Pi, FireBeetle and M5Stack Grove.

Displays · OLED displays · 29 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts

Pinout

Start wiring

TFT & LCD

E-paper

OLED

3D printing

Pinout

Start wiring

TFT & LCD

E-paper

OLED

3D printing