Phoenard Phoenex Shield

Phoenard Phoenex Shield — Phoenard — 102990206

Arduino-compatible shield add-on for Phoenard, connecting via a 30-pin bottom connector and exposing analog (A0–A5), digital GPIO with PWM, ISP, and serial pins. Runs at 3.3V; the 5V rail on the extension connector is only present when USB power is supplied.

Pinout

Logical pinout · physical placement not verified
PHOENARD PHOENEX SHIELDigital GPIO with PWM5V rail (USB conditional)ISP, serial pins

One grouped source record is expanded into separate logical pads where unambiguous; physical placement is not implied.

  • A0-A5 (analog)Extension connector
    Type · Signal
  • Digital GPIO with PWMExtension connector
    Type · Signal
  • ISP, serial pinsExtension connector
    Type · Signal
  • 5V rail (USB conditional)Extension connector
    Type · Power

Start wiring

Shield

Verify supply voltage and logic levels before powering up.

Module pins: 5V rail (USB conditional), A0-A5 (analog), Digital GPIO with PWM, ISP, serial pins. Schematik maps them to your board in the app.

Add-ons

269 other options

About 270 add-ons across Pi HATs, Arduino shields, and FeatherWings. The same function — motor control, PoE, display — usually ships once per host connector family. Get the host board right first.

View all 269

Related groups

4 groups