Adafruit PiUART - USB Console and Power Add-on for Raspberry Pi

Adafruit PiUART - USB Console and Power Add-on for Raspberry Pi, Adafruit, 3589

USB Type-C to serial add-on for headless Raspberry Pi setup, with TX/RX LEDs for data activity indication.

Pinout

Logical pinout ยท physical placement not verified
ADAFRUIT PIUART - USB 5VGPIO15RXDGNDUSB Type-CGPIO14TXDPower switch
  • 5V

    Raspberry Pi 5V power rail. Adafruit Learn states the 5V power pins can be fed from the board USB connector when the switch is ON; product page identifies this revision as USB Type-C.

    Type ยท PowerVoltage ยท 5V
  • GND

    Ground connection on the Raspberry Pi header side of the PiUART add-on.

    Type ยท GroundVoltage ยท 0V
  • GPIO14TXD

    Raspberry Pi UART transmit console signal used by the PiUART USB-to-serial connection.

    Type ยท GPIO, UARTVoltage ยท 3.3V logic
  • GPIO15RXD

    Raspberry Pi UART receive console signal used by the PiUART USB-to-serial connection.

    Type ยท GPIO, UARTVoltage ยท 3.3V logic
  • USB Type-C

    USB-to-serial console and optional power input for the Raspberry Pi, described on the Adafruit product page as a USB Type-C to serial connection with switchable Pi power.

    Type ยท UnknownVoltage ยท USB 5V input when used for power
  • Power switch

    On-off switch controlling whether the PiUART feeds the Raspberry Pi 5V rail from USB power.

    Type ยท ControlVoltage ยท switches 5V rail

Start wiring

Shield

Verify supply voltage and logic levels before powering up.

Module pins: 5V, GND, TXD / GPIO14, RXD / GPIO15. Schematik maps them to your board in the app.

Add-ons

269 other options

About 270 add-ons across Pi HATs, Arduino shields, and FeatherWings. The same function โ€” motor control, PoE, display โ€” usually ships once per host connector family. Get the host board right first.

View all 269

Related groups

4 groups