Pololu Dual G2 High-Power Motor Driver for Raspberry Pi

Pololu Dual G2 High-Power Motor Driver for Raspberry Pi — Pololu — 0606034881587

High-power dual DC motor driver for 40-pin Raspberry Pi (B+/A+/Pi 2/Pi 3), controlled via 6 GPIO pins. Available in three current/voltage variants: 18v22 (22 A, 6.5–18 V), 18v18 (18 A, 6.5–18 V), and 24v14 (14 A, 6.5–28 V). Not compatible with original Pi A or B.

Pinout

Logical pinout · physical placement not verified
POLOLU DUAL G2 HIGH-POMotor power VINGNDM2AM2BM1AM1B
  • Motor power VINGND
    Type · Power, Ground
  • M1AM1B
    Type · Control
  • M2AM2B
    Type · Control

Start wiring

PWM · I2C · UART · Wide input · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: Motor power VIN/GND, Pi GPIO subset (PWM, DIR, FLT per motor). Schematik maps them to your board in the app.

Motor drivers

76 other options

H-bridge breakouts from 1A to 43A (DRV8871, TB6612FNG, BTS7960), stepper drivers (A4988, TMC260, TB6600), I2C servo/solenoid controllers, and Pi/Arduino shields — sized by current and protocol.

View all 76

Related groups

4 groups