Feather add-on wing for prop and cosplay builds, combining a LIS3DH triple-axis accelerometer, three high-current MOSFETs for a 3 W RGB LED, a Class D audio amplifier (8 Ω 1 W / 4 Ω 3 W), and a JST NeoPixel output with level shifter.
| Pin | Position | Type |
|---|---|---|
| VBAT | top row | Power |
| Enable | top row | Control |
| VBUS | top row | Power |
| PWR | top row | Power |
| SW | top row | GPIO |
| IRQ | top row | Signal |
| NEO | top row | Signal |
| SCL | top row | I2C |
| SDA | top row | I2C |
| RESET | bottom row | Control |
| 3.3V | bottom row | Power |
| GND | bottom row | Ground |
| A0 speaker connector | speaker connector | GPIO |
Shield
Confirm the data interface matches your host board.
Module pins: VBAT, VBUS, 3.3V, GND, SW, SCL, SDA. Schematik maps them to your board in the app.
About 270 add-ons across Pi HATs, Arduino shields, and FeatherWings. The same function — motor control, PoE, display — usually ships once per host connector family. Get the host board right first.
15x7 CharliePlex LED Matrix FeatherWing - Cool White visual preview15x7 CharliePlex LED Matrix FeatherWing - Cool White
15x7 CharliePlex LED Matrix FeatherWing - Warm White visual preview15x7 CharliePlex LED Matrix FeatherWing - Warm White
16-Ch High Current Driver Shield Kit v2 visual preview16-Ch High Current Driver Shield Kit v2
19V 90W AC/DC Adapter for LattePanda Mu Full-Function EVA Carrier Board visual preview19V 90W AC/DC Adapter for LattePanda Mu Full-Function EVA Carrier Board
1Sheeld+ for iOS and Android visual preview1Sheeld+ for iOS and Android
2-Channel Isolated CAN Bus HAT+ for Raspberry Pi, Stackable visual preview2-Channel Isolated CAN Bus HAT+ for Raspberry Pi, Stackable
2-Channel Isolated CAN FD HAT for Raspberry Pi visual preview2-Channel Isolated CAN FD HAT for Raspberry Pi
2-Channel Isolated CAN HAT for Raspberry Pi, MCP2515 + SN65HVD230 visual preview2-Channel Isolated CAN HAT for Raspberry Pi, MCP2515 + SN65HVD230
2-Channel Isolated RS485 HAT for Raspberry Pi visual preview2-Channel Isolated RS485 HAT for Raspberry Pi
2-DOF Pan-Tilt HAT for Raspberry Pi visual preview2-DOF Pan-Tilt HAT for Raspberry Pi
3-Channel Relay Expansion Board for Jetson Nano, Optocoupler Isolated visual preview3-Channel Relay Expansion Board for Jetson Nano, Optocoupler Isolated
3Dpad Touchless Gesture Controller Arduino Shield visual preview3Dpad Touchless Gesture Controller Arduino Shield
10 I/Os PLC Module - CPU Arduino Nano (Optoisolated Output) visual previewAbout 75 boards across every Arduino generation: 5V Uno/Mega/GIGA, 3.3V MKR and Portenta, plus DFRduino and Bluno compatibles. Confirm the voltage rail before stacking any shield.
Boards · Arduino boards · 77 parts
10 I/Os Relay Module - CPU ESP32 (Relay Output) visual previewWi-Fi and Bluetooth on a single chip, in every shape from Espressif DevKitC to Adafruit Feathers with STEMMA QT, DFRobot FireBeetles tuned for battery life, and Seeed XIAOs under a thumbnail.
Boards · ESP32 boards · 156 parts
16-Ch Servo Driver Breakout for micro:bit, I2C visual previewSpecialists: Teensy for high-clock audio and USB, Adafruit SAMD boards running CircuitPython or the Arduino IDE, proper STM32 eval kits, and the micro:bit classroom ecosystem. Schematik builds target ESP32, Arduino Uno, and Pico; come here when you have a specific reason to.
Boards · Other MCU boards · 229 parts
Adafruit DVI Breakout Board for HDMI Source Devices visual previewThe Raspberry Pi MCU line — Pico, Pico 2, and third-party boards on the same silicon — plus a deep bench of Pico-pinout displays, loggers, and radio modules that do nothing without a Pico plugged in.
Boards · Pico & RP2040 boards · 43 parts