Adafruit Qwiic / STEMMA QT 5 Port Hub

Name: Adafruit Qwiic / STEMMA QT 5 Port Hub
Brand: Adafruit
SKU: 5625

Availability

Out of stock

Passive five-port Qwiic/STEMMA QT I2C hub with five vertical JST-SH 1 mm connectors, shared power/ground/SDA/SCL rails, breadboard breakout pins, mounting holes and power LED.

Logical pinout · physical placement not verified

One grouped source record is expanded into separate logical pads where unambiguous; physical placement is not implied.

STEMMA QT ports 1-5JST-SH 1mm 4-pin connectors
Five parallel Qwiic/STEMMA QT I2C connectors; Adafruit states all have power, ground, SDA and SCL connected.
Type · Unknown
Powershared connector/header pins
Shared power rail across the five JST-SH connectors and breadboard breakout pins.
Type · Power
Groundshared connector/header pins
Shared ground rail across the five JST-SH connectors and breadboard breakout pins.
Type · Ground
SDASCLshared connector/header pins
Shared I2C data and clock bus across all five ports; passive hub, not an address translator or multiplexer.
Type · I2C

Pin	Position	Type	Function
STEMMA QT ports 1-5	JST-SH 1mm 4-pin connectors	Unknown	Five parallel Qwiic/STEMMA QT I2C connectors; Adafruit states all have power, ground, SDA and SCL connected.
Power	shared connector/header pins	Power	Shared power rail across the five JST-SH connectors and breadboard breakout pins.
Ground	shared connector/header pins	Ground	Shared ground rail across the five JST-SH connectors and breadboard breakout pins.
SDASCL	shared connector/header pins	I2C	Shared I2C data and clock bus across all five ports; passive hub, not an address translator or multiplexer.

Logical pinout · physical placement not verified

One grouped source record is expanded into separate logical pads where unambiguous; physical placement is not implied.

Pin details

4 connections

STEMMA QT ports 1-5
Five parallel Qwiic/STEMMA QT I2C connectors; Adafruit states all have power, ground, SDA and SCL connected.
Unknown
JST-SH 1mm 4-pin connectors
Power
Shared power rail across the five JST-SH connectors and breadboard breakout pins.
Power
shared connector/header pins
Ground
Shared ground rail across the five JST-SH connectors and breadboard breakout pins.
Ground
shared connector/header pins
SDASCL
Shared I2C data and clock bus across all five ports; passive hub, not an address translator or multiplexer.
I2C
shared connector/header pins

Connectors

223 other options

Passive adapters, 2.54 mm pin headers, terminal blocks, JST and barrel-jack connector pairs, RF antennas and microSD adapters. Mechanical fit between two connectors does not confirm voltage, pinout or protocol compatibility.

View all 223

Related groups

4 groups

Cables

Around 250 entries: JST SH/PH cable pairs, Grove and STEMMA QT/Qwiic leads, jumper wires, silicone hookup wire from 30 AWG to 8 AWG, and FPC ribbon cables. Ecosystem bridge cables exist for the PH-to-SH pitch mismatch.

Connectors & cables · Cables & wires · 261 parts

USB and serial

Passive USB cables plus passive USB cables, Micro-B and USB-C breakouts, CP2102 and FT232 USB-UART bridges, DIY cable assembly parts, and USB-C development boards. Data support, host/device role and logic voltage vary significantly across the group.

Connectors & cables · USB cables · 91 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts

LED pixels

WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.

Components · Addressable LEDs · 180 parts