Adafruit Radio Bonnet RFM96W 433MHz - RadioFruit
Raspberry Pi Bonnet with an RFM96W LoRa radio module at 433 MHz for long-range low-bandwidth wireless links. Communicates with the Pi via SPI; suitable for LoRa point-to-point or LoRaWAN gateway builds.
Pinout
One grouped source record is expanded into separate logical pads where unambiguous; physical placement is not implied.
- 3.3V5VGND (passthrough)Type · Power
- GPIO (SPI used: MOSIMISOSCLKCE, plus others)Type · SPI, Signal
| Pin | Type |
|---|---|
| 3.3V5VGND (passthrough) | Power |
| GPIO (SPI used: MOSIMISOSCLKCE, plus others) | SPI, Signal |
One grouped source record is expanded into separate logical pads where unambiguous; physical placement is not implied.
Pin details
2 connections- 3.3V5VGND (passthrough)Power
- GPIO (SPI used: MOSIMISOSCLKCE, plus others)SPI, Signal
Start wiring
Shield
Confirm the data interface matches your host board.
Module pins: 3.3V / 5V / GND (passthrough), GPIO (SPI used: MOSI/MISO/SCLK/CE, plus others). Schematik maps them to your board in the app.
Add-ons
269 other optionsAbout 270 add-ons across Pi HATs, Arduino shields, and FeatherWings. The same function — motor control, PoE, display — usually ships once per host connector family. Get the host board right first.
15x7 CharliePlex LED Matrix FeatherWing - Cool White visual preview15x7 CharliePlex LED Matrix FeatherWing - Cool White
15x7 CharliePlex LED Matrix FeatherWing - Warm White visual preview15x7 CharliePlex LED Matrix FeatherWing - Warm White
16-Ch High Current Driver Shield Kit v2 visual preview16-Ch High Current Driver Shield Kit v2
19V 90W AC/DC Adapter for LattePanda Mu Full-Function EVA Carrier Board visual preview19V 90W AC/DC Adapter for LattePanda Mu Full-Function EVA Carrier Board
1Sheeld+ for iOS and Android visual preview1Sheeld+ for iOS and Android
2-Channel Isolated CAN Bus HAT+ for Raspberry Pi, Stackable visual preview2-Channel Isolated CAN Bus HAT+ for Raspberry Pi, Stackable
2-Channel Isolated CAN FD HAT for Raspberry Pi visual preview2-Channel Isolated CAN FD HAT for Raspberry Pi
2-Channel Isolated CAN HAT for Raspberry Pi, MCP2515 + SN65HVD230 visual preview2-Channel Isolated CAN HAT for Raspberry Pi, MCP2515 + SN65HVD230
2-Channel Isolated RS485 HAT for Raspberry Pi visual preview2-Channel Isolated RS485 HAT for Raspberry Pi
2-DOF Pan-Tilt HAT for Raspberry Pi visual preview2-DOF Pan-Tilt HAT for Raspberry Pi
3-Channel Relay Expansion Board for Jetson Nano, Optocoupler Isolated visual preview3-Channel Relay Expansion Board for Jetson Nano, Optocoupler Isolated
3Dpad Touchless Gesture Controller Arduino Shield visual preview3Dpad Touchless Gesture Controller Arduino Shield
Related groups
4 groups
10 I/Os PLC Module - CPU Arduino Nano (Optoisolated Output) visual previewArduino
About 75 boards across every Arduino generation: 5V Uno/Mega/GIGA, 3.3V MKR and Portenta, plus DFRduino and Bluno compatibles. Confirm the voltage rail before stacking any shield.
Boards · Arduino boards · 77 parts
10 I/Os Relay Module - CPU ESP32 (Relay Output) visual previewESP32
Wi-Fi and Bluetooth on a single chip, in every shape from Espressif DevKitC to Adafruit Feathers with STEMMA QT, DFRobot FireBeetles tuned for battery life, and Seeed XIAOs under a thumbnail.
Boards · ESP32 boards · 159 parts
16-Ch Servo Driver Breakout for micro:bit, I2C visual previewOther MCUs
Specialists: Teensy for high-clock audio and USB, Adafruit SAMD boards running CircuitPython or the Arduino IDE, proper STM32 eval kits, and the micro:bit classroom ecosystem. Schematik builds target ESP32, Arduino Uno, and Pico; come here when you have a specific reason to.
Boards · Other MCU boards · 229 parts
Adafruit DVI Breakout Board for HDMI Source Devices visual previewPi Pico
The Raspberry Pi MCU line — Pico, Pico 2, and third-party boards on the same silicon — plus a deep bench of Pico-pinout displays, loggers, and radio modules that do nothing without a Pico plugged in.
Boards · Pico & RP2040 boards · 43 parts