Build Season 2026 is live: Publish a build to win M5Stack hardwareBuild Season 2026 is live

RGB LED Matrix Panel, P2.5, 64×64, Adjustable Brightness

RGB LED Matrix Panel, P2.5, 64×64, Adjustable Brightness — Waveshare — RGB-Matrix-P2.5-64x64

64×64 full-color RGB LED matrix panel, 2.5 mm pitch, adjustable brightness; HUB75 interface (standard for this panel class).

Pinout

Logical pinout · physical placement not verified
RGB LED MATRIX PANEL, 5VCLKGNDLATR1G1B1R2G2B2OEABCDE
  • 5V
    Type · Power
  • GND
    Type · Ground
  • R1G1B1R2G2B2
    Type · Signal
  • ABCDE
    Type · Control
  • CLK
    Type · Control
  • LAT
    Type · Control
  • OE
    Type · Control

Start wiring

I2C · SPI · Single data line · 5 V · 3.3 – 5 V · Bare

Confirm the data interface matches your host board.

Module pins: 5V, GND, R1/G1/B1/R2/G2/B2, CLK. Schematik maps them to your board in the app.

LED displays

88 other options

Adafruit HT16K33 backpacks, MAX7219 daisy-chains, NeoPixel and DotStar grids, HUB75 RGB matrix panels, charlieplexed arrays, bare clock displays, and two VFD character modules — almost 90 parts, none wired the same way.

View all 88

Related groups

4 groups

TFT & LCD

16×2 and 20×4 character LCDs (parallel, I2C backpack, Qwiic, Grove), SPI TFTs from 0.71 to 3.5 inches, and large DSI and HDMI capacitive-touch panels up to 13.3 inches.

Displays · TFT & LCD displays · 190 parts

E-paper

Waveshare makes up the large majority of parts here and often sells the same panel twice: once as a raw display needing a separate driver board, and once as a module or HAT+ with the SPI controller attached.

Displays · E-paper displays · 101 parts

OLED

About 30 parts: monochrome I2C modules from 0.49 to 1.3 inches, SPI/I2C grayscale and 65K-color RGB panels up to 1.5 inches, a transparent OLED, and ecosystem-specific units for Raspberry Pi, FireBeetle and M5Stack Grove.

Displays · OLED displays · 30 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts