Fermion: TCS3200 RGB Color Sensor Breakout

Fermion: TCS3200 RGB Color Sensor Breakout — DFRobot — SEN0101

RGB color sensor using the TCS3200 chip, which converts light intensity to a frequency output readable by microcontrollers. Includes onboard white LEDs for illumination. Suitable for color sorting and matching.

Pinout

Logical pinout · physical placement not verified
FERMION: TCS3200 RGB CVCCS2GNDS3S0OUTS1
  • VCC

    5 V module supply on common GY-31/SEN0101 boards.

    Type · PowerVoltage · 5V
  • GND

    Ground reference.

    Type · Ground
  • S0

    Output frequency scaling select bit 0.

    Type · GPIO
  • S1

    Output frequency scaling select bit 1.

    Type · GPIO
  • S2

    Photodiode colour-filter select bit 0.

    Type · GPIO
  • S3

    Photodiode colour-filter select bit 1.

    Type · GPIO
  • OUT

    Frequency output; use a divider or level shifter for 3.3 V MCUs when the module is powered from 5 V.

    Type · GPIO

Start wiring

I2C · Analog · 3.3 – 5 V · Breakout

Adafruit describes the CdS photoresistor as a light sensor whose resistance falls as light increases, and its product page gives an examp…

Module pins: VCC, GND. Schematik maps them to your board in the app.

Light & color

79 other options

CdS photoresistors, I2C lux sensors like VEML7700 and TSL2591, multi-channel spectral sensors, UV detectors and TCS-series color sensors — about 80 listings for anything that responds to photons.

View all 79

Related groups

4 groups