Gravity: ML8511 Analog UV Sensor (280~390nm)

Gravity: ML8511 Analog UV Sensor (280~390nm) — DFRobot — SEN0175

ML8511 UV sensor detects UV-A and UV-B radiation across 280–390nm and outputs a proportional analog voltage. Discontinued.

Pinout

Logical pinout · physical placement not verified
GRAVITY: ML8511 ANALOGVCCSignalGND
  • VCCgravity-analog-1

    Gravity Analog PH2.0-3P supply pin for the ML8511 UV sensor board; DFRobot wiki says connect to Arduino 5V.

    Type · PowerVoltage · 3.3V or 5V per DFRobot wiki pinout
  • GNDgravity-analog-2

    Ground pin on the Gravity Analog PH2.0-3P interface; DFRobot wiki says connect to Arduino GND.

    Type · GroundVoltage · 0V
  • Signalgravity-analog-3

    Analog voltage output from the ML8511 UV sensor board; DFRobot wiki says connect to Arduino A0.

    Type · AnalogVoltage · Analogue output, wiki product specification lists output around 1.0V to 2.8V DC

Start wiring

I2C · Analog · 3.3 – 5 V · Breakout

Adafruit describes the CdS photoresistor as a light sensor whose resistance falls as light increases, and its product page gives an examp…

Module pins: VCC, GND. Schematik maps them to your board in the app.

Light & color

79 other options

CdS photoresistors, I2C lux sensors like VEML7700 and TSL2591, multi-channel spectral sensors, UV detectors and TCS-series color sensors — about 80 listings for anything that responds to photons.

View all 79

Related groups

4 groups