SHT20 I2C Temperature & Humidity Sensor (Waterproof Probe)

SHT20 I2C Temperature & Humidity Sensor (Waterproof Probe) — DFRobot — SEN0227

SHT20-based temperature and humidity sensor with waterproof probe and I2C interface. Suited for outdoor or wet environments where direct liquid contact may occur.

Pinout

Logical pinout · physical placement not verified
SHT20 I2C TEMPERATURE RedBlack (Blue)GreenWhite (Yellow)
  • Red1

    VCC supply lead for the SHT20 waterproof probe

    Type · PowerVoltage · 3.3V/5V operating voltage per DFRobot wiki specification
  • Green2

    GND lead

    Type · Ground
  • Black (Blue)3

    SDA I2C data lead

    Type · Signal
  • White (Yellow)4

    SCL I2C clock lead

    Type · Signal

Start wiring

I2C · SPI · Single data line · 3.3 – 5 V · Breakout

Confirm the data interface matches your host board.

Module pins: Red, Green, Black (Blue), White (Yellow). Schematik maps them to your board in the app.

Temp & humidity

165 other options

DHT/AHT sensors, SHT-series humidity chips, BMP and LPS barometers, BME combined sensors, DS18B20 probes, thermocouple amplifiers and non-contact MLX IR sensors — about 165 listings, very different accuracy classes.

View all 165

Related groups

4 groups