Gravity: I2C Digital Wattmeter

Gravity: I2C Digital Wattmeter — DFRobot — SEN0291

I2C wattmeter measuring voltage (up to 26 V), current (up to 8 A), and power with ±0.2% accuracy after calibration. Suited for monitoring solar panels, batteries, and DC power supplies.

Pinout

Logical pinout · physical placement not verified
GRAVITY: I2C DIGITAL WVCCSDAGNDADDRSCL3P TERMINAL
  • VCC1

    Power VCC

    Type · PowerVoltage · 3.3V to 5.5V per DFRobot SEN0291 wiki pinout table
  • GND2

    Power GND

    Type · GroundVoltage · 0V
  • SCL3

    I2C clock signal

    Type · I2C
  • SDA4

    I2C data signal

    Type · I2C
  • ADDR5

    I2C address DIP switch documented in DFRobot SEN0291 wiki pinout table

    Type · Control
  • 3P TERMINAL6

    Voltage and current measurement terminal 3P

    Type · PowerVoltage · IN+ or IN- relative to GND: 0V to 26V per DFRobot SEN0291 wiki specs

Start wiring

I2C · Analog · 3.3 – 5 V · Breakout

Confirm the data interface matches your host board.

Module pins: VCC, GND, SCL, SDA. Schematik maps them to your board in the app.

Power monitors

24 other options

INA-series I2C monitors, Hall-effect sensors like the ACS723 and Gravity 20A/50A boards, and non-invasive CT clamps for everything from 3.3V rail telemetry to mains current sensing.

View all 24

Related groups

4 groups