SHT31 Outdoor Temperature & Humidity Sensor (-40°C~125°C, I2C)

SHT31 Outdoor Temperature & Humidity Sensor (-40°C~125°C, I2C) — DFRobot — SEN0385

Weather-proof SHT31 sensor for outdoor temperature (-40 to 125°C) and humidity measurement over I2C. Low power with fast response time.

Pinout

Logical pinout · physical placement not verified
SHT31 OUTDOOR TEMPERATVCCSDAGNDSCL
  • VCCred wire

    Supply input for the outdoor SHT31 I2C sensor cable, documented by DFRobot pinout as red VCC.

    Type · PowerVoltage · 3.3-5V operating voltage from DFRobot wiki specification
  • GNDblack wire

    Ground return for the sensor cable, documented by DFRobot pinout as black GND.

    Type · Ground
  • SDAgreen wire

    I2C data line for the SHT31 sensor, documented by DFRobot pinout as green SDA.

    Type · I2C
  • SCLyellow wire

    I2C clock line for the SHT31 sensor, documented by DFRobot pinout as yellow SCL.

    Type · I2C

Start wiring

I2C · SPI · Single data line · 3.3 – 5 V · Breakout

Confirm the data interface matches your host board.

Module pins: VCC, GND, SDA, SCL. Schematik maps them to your board in the app.

Temp & humidity

165 other options

DHT/AHT sensors, SHT-series humidity chips, BMP and LPS barometers, BME combined sensors, DS18B20 probes, thermocouple amplifiers and non-contact MLX IR sensors — about 165 listings, very different accuracy classes.

View all 165

Related groups

4 groups