Fermion: ICP-10111 Pressure Sensor (Breakout)

Fermion: ICP-10111 Pressure Sensor (Breakout) — DFRobot — SEN0516

MEMS capacitive barometric pressure sensor (30–110 kPa) with I2C output (address 0x63); 3.3–5.5 V, relative accuracy ±0.01 hPa, 0.4 Pa noise floor. Resolves altitude changes as small as 8.5 cm; suited for drone stabilization and indoor navigation.

Pinout

Logical pinout · physical placement not verified
FERMION: ICP-10111 PREVCCSDAGNDSCL
  • VCC
    Type · Power
  • GND
    Type · Ground
  • SDA
    Type · I2C
  • SCL
    Type · I2C

Start wiring

I2C · SPI · Single data line · 3.3 – 5 V · Breakout

Confirm the data interface matches your host board.

Module pins: VCC, GND, SDA, SCL. Schematik maps them to your board in the app.

Temp & humidity

165 other options

DHT/AHT sensors, SHT-series humidity chips, BMP and LPS barometers, BME combined sensors, DS18B20 probes, thermocouple amplifiers and non-contact MLX IR sensors — about 165 listings, very different accuracy classes.

View all 165

Related groups

4 groups