Gravity: MAX30102 PPG Heart Rate and Oximeter Sensor (I2C/UART)

Gravity: MAX30102 PPG Heart Rate and Oximeter Sensor (I2C/UART) — DFRobot — SEN0518

MAX30102 PPG heart rate and SpO2 module with integrated MCU; I2C (0x57) or UART (9600 baud), 3.3/5 V supply, under 15 mA. Not a medical instrument; for hobby and prototyping use only. Finger pressure against the sensor directly affects reading accuracy.

Pinout

Logical pinout · physical placement not verified
GRAVITY: MAX30102 PPG DTGNDCTVCC
  • DTGravity connector pin 1

    I2C data line / UART TX

    Type · SignalVoltage · 3.3V/5V logic
  • CTGravity connector pin 2

    I2C clock line / UART RX

    Type · SignalVoltage · 3.3V/5V logic
  • GNDGravity connector pin 3

    Power negative / ground

    Type · GroundVoltage · 0V
  • VCCGravity connector pin 4

    Power positive input

    Type · PowerVoltage · 3.3V/5V

Start wiring

UART · I2C · Analog · 3.3 – 5 V · Breakout

Confirm the data interface matches your host board.

Module pins: GND, VCC, D/T, C/T. Schematik maps them to your board in the app.

Biometrics

25 other options

UART/I2C fingerprint modules, MAX30102 PPG breakouts, and analog ECG/EMG front-ends for access control and hobby biometric sensing.

View all 25

Related groups

4 groups