SHT30 Temperature & Humidity Sensor - Wired Enclosed Shell

SHT30 Temperature & Humidity Sensor - Wired Enclosed Shell — Adafruit — 5064

SHT30-D I2C temperature and humidity sensor in a wired enclosed housing. Rated ±2% RH and ±0.5°C accuracy; uses a true I2C interface unlike the older SHT sensors.

Pinout

Logical pinout · physical placement not verified
SHT30 TEMPERATURE & HURedVCCYellowSCLBlackGNDWhiteSDA
  • RedVCC

    Power wire for the enclosed SHT30 sensor.

    Type · PowerVoltage · 2.15-5VDC per Adafruit product page.
  • BlackGND

    Ground wire for the enclosed SHT30 sensor.

    Type · GroundVoltage · 0V reference.
  • YellowSCL

    I2C clock wire, connect to the controller SCL pin.

    Type · I2C, Signal
  • WhiteSDA

    I2C data wire, connect to the controller SDA pin.

    Type · I2C, Signal

Start wiring

I2C · SPI · Single data line · 3.3 – 5 V · Breakout

Confirm the data interface matches your host board.

Module pins: Red / VCC, Black / GND, Yellow / SCL, White / SDA. Schematik maps them to your board in the app.

Temp & humidity

165 other options

DHT/AHT sensors, SHT-series humidity chips, BMP and LPS barometers, BME combined sensors, DS18B20 probes, thermocouple amplifiers and non-contact MLX IR sensors — about 165 listings, very different accuracy classes.

View all 165

Related groups

4 groups