SIM7600E-H LTE Cat-4 HAT for Raspberry Pi, GNSS, EMEA/SEA

SIM7600E-H LTE Cat-4 HAT for Raspberry Pi, GNSS, EMEA/SEA — Waveshare — SIM7600E-H 4G HAT

SIM7600E-H-based LTE Cat-4 HAT for Raspberry Pi supporting 4G/3G/2G and GNSS. Band coverage targets Europe, Southeast Asia, West Asia, and Africa (EMEA/SEA region).

Pinout

Logical pinout · physical placement not verified
SIM7600E-H LTE CAT-4 H5VTXDGNDPWRRXDFLIGHTMODE
  • 5V40-pin header

    5V supply from host 40-pin header.

    Type · Power
  • GND40-pin header

    Ground from host 40-pin header.

    Type · Ground
  • RXDUART/header

    Module receive data connected to host TXD.

    Type · UART
  • TXDUART/header

    Module transmit data connected to host RXD.

    Type · UART
  • PWR40-pin header

    Power control pin.

    Type · Power
  • FLIGHTMODE40-pin header

    Flight mode control, pulled high to enter flight mode.

    Type · GPIO

Start wiring

UART · USB · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: 5V, GND, RXD, TXD. Schematik maps them to your board in the app.

Cellular

57 other options

Adafruit FONA GSM breakouts, the Gravity Air780EU 4G Cat 1 module, Dragino NB-IoT Shield-B8, Pycom FiPy, Quectel and SIMCom M.2 5G modems, and the RockBLOCK 9603 Iridium modem each target a different network tier.

View all 57

Related groups

4 groups