SIM7600SA-H 4G HAT for Raspberry Pi, GNSS, AU/NZ/Taiwan/LatAm

SIM7600SA-H-based LTE Cat-4 HAT for Raspberry Pi with GNSS, targeting Australia, New Zealand, Taiwan, and Latin America bands. Supports 4G/3G/2G on SA-region frequencies.

Logical pinout · physical placement not verified

5V40-pin header
5V supply from Raspberry Pi/Jetson Nano 40-pin header.
Type · Power
GND40-pin header
Ground on Raspberry Pi/Jetson Nano 40-pin header.
Type · Ground
RXD40-pin header/UART
Module receive data connected to host TXD, Raspberry Pi BCM14 in the documented table.
Type · UART
TXD40-pin header/UART
Module transmit data connected to host RXD, Raspberry Pi BCM15 in the documented table.
Type · UART
PWR40-pin header
Power control pin, documented as Raspberry Pi P22/BCM6 or Jetson board pin 31 for power switching.
Type · Power
FLIGHTMODE40-pin header
Flight mode control pin, enters flight mode when pulled high, documented as Raspberry Pi P7/BCM4.
Type · GPIO

Pin	Position	Type	Function
5V	40-pin header	Power	5V supply from Raspberry Pi/Jetson Nano 40-pin header.
GND	40-pin header	Ground	Ground on Raspberry Pi/Jetson Nano 40-pin header.
RXD	40-pin header/UART	UART	Module receive data connected to host TXD, Raspberry Pi BCM14 in the documented table.
TXD	40-pin header/UART	UART	Module transmit data connected to host RXD, Raspberry Pi BCM15 in the documented table.
PWR	40-pin header	Power	Power control pin, documented as Raspberry Pi P22/BCM6 or Jetson board pin 31 for power switching.
FLIGHTMODE	40-pin header	GPIO	Flight mode control pin, enters flight mode when pulled high, documented as Raspberry Pi P7/BCM4.

Logical pinout · physical placement not verified

Pin details

6 connections

5V
5V supply from Raspberry Pi/Jetson Nano 40-pin header.
Power
40-pin header
GND
Ground on Raspberry Pi/Jetson Nano 40-pin header.
Ground
40-pin header
RXD
Module receive data connected to host TXD, Raspberry Pi BCM14 in the documented table.
UART
40-pin header/UART
TXD
Module transmit data connected to host RXD, Raspberry Pi BCM15 in the documented table.
UART
40-pin header/UART
PWR
Power control pin, documented as Raspberry Pi P22/BCM6 or Jetson board pin 31 for power switching.
Power
40-pin header
FLIGHTMODE
Flight mode control pin, enters flight mode when pulled high, documented as Raspberry Pi P7/BCM4.
GPIO
40-pin header

Start wiring

UART · USB · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: 5V, GND, RXD, TXD. Schematik maps them to your board in the app.

Cellular

57 other options

Adafruit FONA GSM breakouts, the Gravity Air780EU 4G Cat 1 module, Dragino NB-IoT Shield-B8, Pycom FiPy, Quectel and SIMCom M.2 5G modems, and the RockBLOCK 9603 Iridium modem each target a different network tier.

View all 57

Related groups

4 groups

Bluetooth

BLE 5-era modules (nRF52840, MDBT50Q), XIAO MG24 boards with Matter-over-Thread, Bluefruit UART/SPI bridges, HM-11 serial modules, and BLE sniffers cover different jobs and different hosts.

Wireless & comms · Bluetooth modules · 71 parts

GNSS & GPS

Adafruit Ultimate GPS (PA1616S/PA1616D), NEO-6M and NEO-M9N u-blox breakouts, Gravity GNSS BeiDou boards with I2C/UART, and 4G or LoRa RTK kits — accuracy and constellation requirements split them.

Wireless & comms · GNSS & GPS · 68 parts

LoRa & RF

RFM95W and SX1262 LoRa transceivers, Wio-E5 LoRaWAN modules, SX1302 gateways, Digi XBee mesh radios, 433 MHz ASK serial links, Dragino IoT sensor nodes, and the SDRplay RSP2 wideband SDR receiver.

Wireless & comms · LoRa & RF modules · 94 parts

Networking

ESP8285, ATWINC1500, and EMW3060 Wi-Fi modules; the WIZ5500 Ethernet co-processor; the DP83848 RMII PHY board; 802.11n USB adapters for the Pi; and an XBee USB configuration adapter.

Wireless & comms · Wi-Fi & networking · 26 parts