SIM7670G LTE Cat-1/GNSS HAT for Raspberry Pi, Global, 3x USB 2.0

SIM7670G LTE Cat-1/GNSS HAT for Raspberry Pi, Global, 3x USB 2.0 — Waveshare — SIM7670G LTE Cat-1/GNSS HAT

SIM7670G-based LTE Cat-1 HAT for Raspberry Pi with global multi-band support and GNSS positioning. Adds 3x USB 2.0 ports; Cat-1 (10 Mbps DL) balances cost and throughput for IoT applications.

Pinout

Logical pinout · physical placement not verified
SIM7670G LTE CAT-1/GNS5VVBUSTXRX (UART)GNDPWRKEYBOOT
  • 5VVBUSPi 40-pin header / USB
    Type · Power
  • GNDPi header / USB
    Type · Ground
  • TXRX (UART)DIP switch controlled to Pi serial
    Type · UART, Signal
  • PWRKEYBOOTDIP / pads
    Type · Control

Start wiring

UART · USB · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: 5V / VBUS, GND, TX / RX (UART). Schematik maps them to your board in the app.

Cellular

57 other options

Adafruit FONA GSM breakouts, the Gravity Air780EU 4G Cat 1 module, Dragino NB-IoT Shield-B8, Pycom FiPy, Quectel and SIMCom M.2 5G modems, and the RockBLOCK 9603 Iridium modem each target a different network tier.

View all 57

Related groups

4 groups