SparkFun Qwiic Pro Micro BoogieBoard

Name: SparkFun Qwiic Pro Micro BoogieBoard
Brand: SparkFun
SKU: DEV-16442

SparkFun · DEV-16442

SparkFunView vendor page$19.95

Identifier

DEV-16442

Price

$19.95

The SparkFun Qwiic Pro Micro adds a reset button, Qwiic connector, USB-C, and castellated pads to the miniaturized Arduino board!

Pinout

Pin	Position	Type	Function	Voltage
GND	1	ground	Qwiic/STEMMA QT ground
3V3	2	power	Qwiic/STEMMA QT 3.3 V supply	3.3V
SDA	3	i2c data	I2C data
SCL	4	i2c clock	I2C clock

Connectors

5 other options

Compare parts

Sort passive connector adapters from Qwiic boards, LCD modules and microSD card adapters before assuming anything with the right plug will substitute safely.

9V to Barrel Jack Adapter visual preview
9V to Barrel Jack Adapter
Passive 9 V battery to 5.5 × 2.1 mm center-positive barrel adapter. Check that the target board accepts 9 V barrel input.
$1.50
SparkFun 16x2 SerLCD - RGB Backlight (Qwiic) visual preview
SparkFun 16x2 SerLCD - RGB Backlight (Qwiic)
Serial/Qwiic LCD module. Qwiic connector helps wiring, but the part is a display module with firmware and address assumptions.
$32.50
MicroUSB Plug to 5.5/2.1mm DC Barrel Jack Adapter | Kiwi Electronics visual preview
MicroUSB Plug to 5.5/2.1mm DC Barrel Jack Adapter | Kiwi Electronics
Passive MicroUSB to 5.5 × 2.1 mm barrel adapter. Connector conversion only, not voltage conversion or regulation.
Micro SD Card Adapter for Raspberry & Macbooks - Black visual preview
Micro SD Card Adapter for Raspberry & Macbooks - Black
Physical microSD card adapter for Raspberry Pi and MacBook-style slots. Compare fit and card support, not power or I²C details.
Micro SD Card Adapter for Raspberry & Macbooks - Blue visual preview
Micro SD Card Adapter for Raspberry & Macbooks - Blue
Same microSD adapter class as the black Seeed listing, with color/variant differences rather than a different electronic role.

Explore other component groups

USB and serial

Separate passive USB leads, connector adapters, breakout boards, USB-UART bridges and USB-C development boards before treating one as a replacement for another.

Connectors & cables · USB cables · 9 parts

Displays

Character LCDs, SPI TFTs, e-paper modules and larger capacitive-touch TFT panels solve different display jobs. Treat display class, interface, controller, resolution, touch, refresh behaviour, storage, voltage and mounting as separate swap checks.

Displays · TFT & LCD displays · 25 parts

Air quality

Choose between MQ gas sensors, VOC/eCO2 indoor-air sensors, true CO2 modules and particulate sensors without treating every air-quality breakout as the same detector.

Sensors · Gas & air-quality sensors · 28 parts

Level shifters

Pick level shifters by bus behavior: I2C/open-drain, auto-direction push-pull, direction-controlled buffers, or 3 V to 5 V logic. They are not universal adapters.

Components · Logic Level Converters · 21 parts