Grove - Light Sensor v1.2

Grove - Light Sensor v1.2 — Seeed Studio — 101020132

Analog light intensity module using an LS06-S photoresistor; outputs a variable voltage that rises with increasing illumination. Connects via Grove analog interface; ADC resolution on the host board determines the output range.

Pinout

Logical pinout · physical placement not verified
GROVE - LIGHT SENSOR VSIGVCCNCGND
  • SIGgrove-1

    Grove Light Sensor analogue output; Seeed wiki connects the module to analog port A0

    Type · Analog
  • NCgrove-2

    not connected on the Grove connector; Seeed wiki wiring table says the white wire is not connected

    Type · Control
  • VCCgrove-3

    Grove connector supply rail

    Type · PowerVoltage · 5V in the Seeeduino wiring table
  • GNDgrove-4

    Grove connector ground

    Type · GroundVoltage · 0V

Start wiring

I2C · Analog · 3.3 – 5 V · Breakout

Adafruit describes the CdS photoresistor as a light sensor whose resistance falls as light increases, and its product page gives an examp…

Module pins: VCC, GND. Schematik maps them to your board in the app.

Light & color

79 other options

CdS photoresistors, I2C lux sensors like VEML7700 and TSL2591, multi-channel spectral sensors, UV detectors and TCS-series color sensors — about 80 listings for anything that responds to photons.

View all 79

Related groups

4 groups