USB Type A Jack Breakout Cable with Premium Female Jumpers

USB-A female receptacle on a short cable with individual female jumper sockets on VBUS, D–, D+, and GND. No converter chip — connects D+/D– directly to host GPIO pins for bare-metal USB work.

Logical pinout · physical placement not verified

Red wireVBUS
USB 5V power lead to the USB device. Adafruit states the red wire connects to 5V power.
Type · PowerVoltage · 5V USB VBUS
Black wireGND
Common USB data and power ground. Adafruit states the black wire connects to common data/power ground.
Type · GroundVoltage · 0V reference
Green wireD+
USB D+ data positive lead. Adafruit states the green wire connects to D+ data positive.
Type · USB, Signal
White wireD-
USB D- data negative lead. Adafruit states the white wire connects to D- data negative.
Type · USB, Signal

Pin	Type	Function	Voltage
Red wireVBUS	Power	USB 5V power lead to the USB device. Adafruit states the red wire connects to 5V power.	5V USB VBUS
Black wireGND	Ground	Common USB data and power ground. Adafruit states the black wire connects to common data/power ground.	0V reference
Green wireD+	USB, Signal	USB D+ data positive lead. Adafruit states the green wire connects to D+ data positive.
White wireD-	USB, Signal	USB D- data negative lead. Adafruit states the white wire connects to D- data negative.

Logical pinout · physical placement not verified

Pin details

4 connections

Red wireVBUS
USB 5V power lead to the USB device. Adafruit states the red wire connects to 5V power.
PowerVoltage · 5V USB VBUS
Black wireGND
Common USB data and power ground. Adafruit states the black wire connects to common data/power ground.
GroundVoltage · 0V reference
Green wireD+
USB D+ data positive lead. Adafruit states the green wire connects to D+ data positive.
USB, Signal
White wireD-
USB D- data negative lead. Adafruit states the white wire connects to D- data negative.
USB, Signal

USB and serial

90 other options

Passive USB cables plus passive USB cables, Micro-B and USB-C breakouts, CP2102 and FT232 USB-UART bridges, DIY cable assembly parts, and USB-C development boards. Data support, host/device role and logic voltage vary significantly across the group.

View all 90

Related groups

4 groups

Cables

Around 250 entries: JST SH/PH cable pairs, Grove and STEMMA QT/Qwiic leads, jumper wires, silicone hookup wire from 30 AWG to 8 AWG, and FPC ribbon cables. Ecosystem bridge cables exist for the PH-to-SH pitch mismatch.

Connectors & cables · Cables & wires · 261 parts

Connectors

Passive adapters, 2.54 mm pin headers, terminal blocks, JST and barrel-jack connector pairs, RF antennas and microSD adapters. Mechanical fit between two connectors does not confirm voltage, pinout or protocol compatibility.

Connectors & cables · Connectors · 224 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts

LED pixels

WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.

Components · Addressable LEDs · 180 parts