Adafruit VEML6075 UVA UVB and UV Index Sensor Breakout

Adafruit VEML6075 UVA UVB and UV Index Sensor Breakout — Adafruit — 3964

I2C UVA and UVB dual-band light sensor breakout (VEML6075) with onboard calibration registers for direct UV Index output. Works at 3.3 V or 5 V; no additional ADC or computation needed for UV Index readings.

Pinout

Logical pinout · physical placement not verified
ADAFRUIT VEML6075 UVA VINSCL3V3SDAGND
  • VIN

    Power input. Adafruit Learn says the board regulator accepts 3-5VDC and should be powered at the microcontroller logic level.

    Type · PowerVoltage · 3-5VDC input
  • 3V3

    3.3V output from the onboard voltage regulator. Adafruit Learn says up to 100mA may be drawn.

    Type · PowerVoltage · 3.3V output, up to 100mA
  • GND

    Ground reference.

    Type · GroundVoltage · 0V
  • SCL

    I2C clock line. Adafruit Learn says to connect to the microcontroller I2C clock line.

    Type · I2C
  • SDA

    I2C data line. Adafruit Learn says to connect to the microcontroller I2C data line.

    Type · I2C

Start wiring

I2C · Analog · 3.3 – 5 V · Breakout

Adafruit describes the CdS photoresistor as a light sensor whose resistance falls as light increases, and its product page gives an examp…

Module pins: VIN, 3V3, GND, SCL, SDA. Schematik maps them to your board in the app.

Light & color

79 other options

CdS photoresistors, I2C lux sensors like VEML7700 and TSL2591, multi-channel spectral sensors, UV detectors and TCS-series color sensors — about 80 listings for anything that responds to photons.

View all 79

Related groups

4 groups