Waterproof 1-Wire DS18B20 Digital Temperature Sensor

Waterproof 1-Wire DS18B20 Digital Temperature Sensor — Adafruit — 381

Pre-wired, heat-shrink waterproofed DS18B20 1-Wire temperature sensor on a 1 m cable, rated to 125°C but with PVC jacketing that limits continuous use to 100°C. Multiple sensors can share one data line. Needs a 4.7 kΩ pull-up and a 1-Wire library.

Pinout

Logical pinout · physical placement not verified
WATERPROOF 1-WIRE DS18Red wireVCCYellow or White wireDataBlue or Black wireGNDCopper shield
  • Red wireVCC

    DS18B20 waterproof sensor supply lead.

    Type · PowerVoltage · 3-5V wiring stated by Adafruit; technical specs state usable with 3.0V to 5.5V power/data.
  • Blue or Black wireGND

    DS18B20 waterproof sensor ground lead.

    Type · Ground
  • Yellow or White wireData

    1-Wire digital data lead for the DS18B20 waterproof sensor.

    Type · SignalVoltage · 1-Wire data usable with 3.0V to 5.5V power/data per Adafruit product page.
  • Copper shield

    Shield conductor present on four-wire versions, soldered to the wire shielding per Adafruit product page.

    Type · Unknown

Start wiring

I2C · SPI · Single data line · 3.3 – 5 V · Breakout

Verify supply voltage and logic levels before powering up.

Module pins: Red wire / VCC, Blue or Black wire / GND, Yellow or White wire / Data. Schematik maps them to your board in the app.

Temp & humidity

165 other options

DHT/AHT sensors, SHT-series humidity chips, BMP and LPS barometers, BME combined sensors, DS18B20 probes, thermocouple amplifiers and non-contact MLX IR sensors — about 165 listings, very different accuracy classes.

View all 165

Related groups

4 groups