Passive PoE Cable Set — Seeed Studio — 110990096

Passive Power-over-Ethernet injector/splitter pair using spare pairs (pins 4/5 +, 7/8 −) on Cat5 cabling. Supports 3–57 V at up to 100BASE-T speeds; 5.5 × 2.1 mm barrel connector, 19 cm cable length. Not IEEE 802.3af/at active PoE.

Pinout

Logical pinout · physical placement not verified
PASSIVE POE CABLE SETRJ45 455.5×2.1 mm barrel +RJ45 785.5×2.1 mm barrel −
  • RJ45 45
    Type · Power
  • RJ45 78
    Type · Ground
  • 5.5×2.1 mm barrel +
    Type · Power
  • 5.5×2.1 mm barrel −
    Type · Ground

Start wiring

Ethernet · UART · SPI · Shield

Verify supply voltage and logic levels before powering up.

Module pins: RJ45 4/5, 5.5×2.1 mm barrel +, RJ45 7/8, 5.5×2.1 mm barrel −. Schematik maps them to your board in the app.

Wired comms

118 other options

W5100/W5500 Ethernet shields, LAN8720 RMII PHY boards, MAX3243 RS-232 level shifters, isolated USB-to-RS485 converters, CAN FD bridges, and passive or active PoE injectors and splitters.

View all 118

Related groups

4 groups