Vibrating Mini Motor Disc
Sealed coin-type eccentric-mass vibration motor for haptic feedback, driven directly by two wires (red positive, blue negative). Rated 2.5–3.8V; operates from 2–5V with current and vibration strength scaling with voltage.
Pinout
- Red lead (+)
Positive motor power lead. Adafruit states the red wire is positive and the two wires control/power the vibrating motor.
Type · powerVoltage · Rated 2.5V to 3.8V; Adafruit notes operation from 2V up to 5V with higher current/stronger vibration. - Blue lead (-)
Negative motor power lead. Adafruit states the blue wire is negative.
Type · groundVoltage · Return/negative lead for the same 2V to 5V motor supply range stated by Adafruit.
| Pin | Position | Type | Function | Voltage |
|---|---|---|---|---|
| Red lead (+) | power | Positive motor power lead. Adafruit states the red wire is positive and the two wires control/power the vibrating motor. | Rated 2.5V to 3.8V; Adafruit notes operation from 2V up to 5V with higher current/stronger vibration. | |
| Blue lead (-) |
Start wiring
Wide input · Wired
Verify supply voltage and logic levels before powering up.
Module pins: Red lead (+), Blue lead (-). Schematik maps them to your board in the app.
DC motors
134 other optionsN20 micros in 1:50–1:298 ratios, 6V TT gearbox motors (120:1, 160RPM), 12V quadrature encoder gearmotors up to 45kg.cm, plus coreless micros, vibration discs, USB fans and a few outlier brushless motors.
Related groups
4 groups
15A Single DC Motor Driver visual preview
2×15A DC Motor Driver visual preview
20A Bidirectional Brushed ESC Speed Controller without Brake (XT60 Connector) visual preview
2x1A DC Motor Shield for Arduino visual previewMotor drivers
H-bridge breakouts from 1A to 43A (DRV8871, TB6612FNG, BTS7960), stepper drivers (A4988, TMC260, TB6600), I2C servo/solenoid controllers, and Pi/Arduino shields — sized by current and protocol.
Motors & actuators · Motor drivers · 77 parts
12V Solenoid Valve - DN15 visual preview
370 Mini Vacuum Pump visual preview
5V Electromagnet (15 Kg Height 22mm) visual preview
5V Electromagnet (15 Kg Height 25mm) visual previewPumps & valves
Solenoid valves (DN15/DN20 12V), 6V pneumatic air valves, push-pull and lock-style solenoids, 5V electromagnets (3–35kg holding force), 6V electric push rods (10–100mm stroke), peristaltic dosing pumps and submersible water pumps.
Motors & actuators · Pumps & solenoids · 41 parts
1 Degree of Freedom DF05BB Steering Head visual preview
16mm Height Metal Caster Bearing Wheel visual preview
20mm Height Metal Caster Bearing Wheel visual preview
2GT 60-Tooth Aluminum Timing Pulley, 19 mm Bore, 6 mm Belt visual previewMechanics
Robot chassis (2WD miniQ, 4WD mecanum, 6WD outdoor), mecanum wheels (48–97mm), brass hex hubs (4–6mm), shaft couplers, 2GT timing pulleys and uArm robotic arms.
Motors & actuators · Robotics & mechanics · 141 parts
2.3KG Serial Bus Servo (6V) visual preview
2.5g 360° Micro Servo (0.45kg) visual preview
2Kg 180° Clutch Servo visual preview
2Kg 300° Clutch Servo visual previewServos
9g micros and clutch PWM servos, IP67 metal servos to 35KG, and ST/SC/CF serial bus servos (2.3kg to 120kg.cm at 24V) — protocol matters as much as torque rating here.
Motors & actuators · Servos · 99 parts
