Lock-style Solenoid - 12VDC
Electronic bolt solenoid designed for cabinet or door locking: slug extends at rest (locked, no power) and retracts when 9–12V DC is applied. Slug orientation is adjustable in 90° increments by removing two screws.
Pinout
- Coil lead 1
One solenoid coil lead; applying 9-12VDC across the coil retracts the locking slug according to the Adafruit product page.
Type · powerVoltage · 9-12VDC actuation, 12VDC solenoid product. - Coil lead 2
Other solenoid coil lead; use with Coil lead 1 to energise the lock solenoid.
Type · powerVoltage · 9-12VDC actuation, 12VDC solenoid product.
| Pin | Position | Type | Function | Voltage |
|---|---|---|---|---|
| Coil lead 1 | power | One solenoid coil lead; applying 9-12VDC across the coil retracts the locking slug according to the Adafruit product page. | 9-12VDC actuation, 12VDC solenoid product. | |
| Coil lead 2 |
Start wiring
5 V · 12 V · Wired
Verify supply voltage and logic levels before powering up.
Module pins: Coil lead 1, Coil lead 2. Schematik maps them to your board in the app.
Pumps & valves
40 other optionsSolenoid valves (DN15/DN20 12V), 6V pneumatic air valves, push-pull and lock-style solenoids, 5V electromagnets (3–35kg holding force), 6V electric push rods (10–100mm stroke), peristaltic dosing pumps and submersible water pumps.
Related groups
4 groups
12V 184P Gear Motor with Encoder visual preview
12V DC Motor 350RPM w/Encoder (12kg*cm) visual preview
12V Low Noise DC Motor 143RPM w/Encoder visual preview
12V Metal DC Geared Motor with Encoder (131:1, 83RPM, 45Kg.cm) visual previewDC motors
N20 micros in 1:50–1:298 ratios, 6V TT gearbox motors (120:1, 160RPM), 12V quadrature encoder gearmotors up to 45kg.cm, plus coreless micros, vibration discs, USB fans and a few outlier brushless motors.
Motors & actuators · DC & gear motors · 135 parts
15A Single DC Motor Driver visual preview
2×15A DC Motor Driver visual preview
20A Bidirectional Brushed ESC Speed Controller without Brake (XT60 Connector) visual preview
2x1A DC Motor Shield for Arduino visual previewMotor drivers
H-bridge breakouts from 1A to 43A (DRV8871, TB6612FNG, BTS7960), stepper drivers (A4988, TMC260, TB6600), I2C servo/solenoid controllers, and Pi/Arduino shields — sized by current and protocol.
Motors & actuators · Motor drivers · 77 parts
1 Degree of Freedom DF05BB Steering Head visual preview
16mm Height Metal Caster Bearing Wheel visual preview
20mm Height Metal Caster Bearing Wheel visual preview
2GT 60-Tooth Aluminum Timing Pulley, 19 mm Bore, 6 mm Belt visual previewMechanics
Robot chassis (2WD miniQ, 4WD mecanum, 6WD outdoor), mecanum wheels (48–97mm), brass hex hubs (4–6mm), shaft couplers, 2GT timing pulleys and uArm robotic arms.
Motors & actuators · Robotics & mechanics · 141 parts
2.3KG Serial Bus Servo (6V) visual preview
2.5g 360° Micro Servo (0.45kg) visual preview
2Kg 180° Clutch Servo visual preview
2Kg 300° Clutch Servo visual previewServos
9g micros and clutch PWM servos, IP67 metal servos to 35KG, and ST/SC/CF serial bus servos (2.3kg to 120kg.cm at 24V) — protocol matters as much as torque rating here.
Motors & actuators · Servos · 99 parts
