IDC Breakout Helper - 2x3 (6 pin)

Matched pair of 2x3 IDC socket and pin header for breaking out a 6-pin IDC ribbon cable to breadboard or perfboard. Breadboard, Perma-Proto board, and IDC cable sold separately.

IDC 11
Pass-through contact on the 2x3 0.1 inch IDC socket/header breadboard helper; signal assignment depends on the attached 6-pin IDC cable or circuit.
Type · passive
IDC 22
Pass-through contact on the 2x3 0.1 inch IDC socket/header breadboard helper; signal assignment depends on the attached 6-pin IDC cable or circuit.
Type · passive
IDC 33
Pass-through contact on the 2x3 0.1 inch IDC socket/header breadboard helper; signal assignment depends on the attached 6-pin IDC cable or circuit.
Type · passive
IDC 44
Pass-through contact on the 2x3 0.1 inch IDC socket/header breadboard helper; signal assignment depends on the attached 6-pin IDC cable or circuit.
Type · passive
IDC 5

Connectors

228 other options

Passive adapters, 2.54 mm pin headers, terminal blocks, JST and barrel-jack connector pairs, RF antennas and microSD adapters. Mechanical fit between two connectors does not confirm voltage, pinout or protocol compatibility.

View all 228

SparkFun Qwiic Pro Micro BoogieBoard visual preview

Related groups

4 groups

Cables

Around 250 entries: JST SH/PH cable pairs, Grove and STEMMA QT/Qwiic leads, jumper wires, silicone hookup wire from 30 AWG to 8 AWG, and FPC ribbon cables. Ecosystem bridge cables exist for the PH-to-SH pitch mismatch.

Connectors & cables · Cables & wires · 261 parts

USB and serial

Passive USB cables plus passive USB cables, Micro-B and USB-C breakouts, CP2102 and FT232 USB-UART bridges, DIY cable assembly parts, and USB-C development boards. Data support, host/device role and logic voltage vary significantly across the group.

Connectors & cables · USB cables · 95 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts

LED pixels

WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.

Components · Addressable LEDs · 176 parts

Pin	Position	Type	Function
IDC 1	1	passive	Pass-through contact on the 2x3 0.1 inch IDC socket/header breadboard helper; signal assignment depends on the attached 6-pin IDC cable or circuit.
IDC 2	2	passive	Pass-through contact on the 2x3 0.1 inch IDC socket/header breadboard helper; signal assignment depends on the attached 6-pin IDC cable or circuit.
IDC 3	3	passive	Pass-through contact on the 2x3 0.1 inch IDC socket/header breadboard helper; signal assignment depends on the attached 6-pin IDC cable or circuit.
IDC 4	4	passive	Pass-through contact on the 2x3 0.1 inch IDC socket/header breadboard helper; signal assignment depends on the attached 6-pin IDC cable or circuit.
IDC 5	5	passive	Pass-through contact on the 2x3 0.1 inch IDC socket/header breadboard helper; signal assignment depends on the attached 6-pin IDC cable or circuit.
IDC 6	6	passive	Pass-through contact on the 2x3 0.1 inch IDC socket/header breadboard helper; signal assignment depends on the attached 6-pin IDC cable or circuit.

Pinout

Cables

USB and serial

3D printing

LED pixels