JST PH 2mm 4-Pin Socket to Color Coded Cable - 200mm
200mm cable with a JST PH 2mm 4-pin female housing on one end and four color-coded tinned wire ends on the other, for extending or hand-wiring JST PH 4-pin connections.
Pinout
- GND
Black wire, ground, source states “Black for GND”.
Type · ground - V+
Red wire, positive supply rail, source states “Red for V+”.
Type · power - SDA
White wire, I2C/data signal, source states “White for SDA”.
Type · signal - SCL
Green wire, I2C/clock signal, source states “Green for SCL”.
Type · signal
| Pin | Position | Type | Function | Voltage |
|---|---|---|---|---|
| GND |
Cables
260 other optionsAround 250 entries: JST SH/PH cable pairs, Grove and STEMMA QT/Qwiic leads, jumper wires, silicone hookup wire from 30 AWG to 8 AWG, and FPC ribbon cables. Ecosystem bridge cables exist for the PH-to-SH pitch mismatch.
Related groups
4 groups
SparkFun Qwiic Pro Micro BoogieBoard visual preview
9V to Barrel Jack Adapter visual preview
SparkFun 16x2 SerLCD - RGB Backlight (Qwiic) visual preview
MicroUSB Plug to 5.5/2.1mm DC Barrel Jack Adapter visual previewConnectors
Passive adapters, 2.54 mm pin headers, terminal blocks, JST and barrel-jack connector pairs, RF antennas and microSD adapters. Mechanical fit between two connectors does not confirm voltage, pinout or protocol compatibility.
Connectors & cables · Connectors · 229 parts
Raspberry Pi Micro USB to USB-C Adapter - Black visual preview
SparkFun Qwiic Pro Micro - USB-C visual preview
SparkFun USB Micro-B Plug Breakout visual preview
USB cable - USB A to Micro-B visual previewUSB and serial
Passive USB cables plus passive USB cables, Micro-B and USB-C breakouts, CP2102 and FT232 USB-UART bridges, DIY cable assembly parts, and USB-C development boards. Data support, host/device role and logic voltage vary significantly across the group.
Connectors & cables · USB cables · 95 parts
1.75mm PLA (1kg) - Black visual preview
1.75mm PLA (1kg) - Gold visual preview
1.75mm PLA (1kg) - Green visual preview
1.75mm PLA (1kg) - Natural visual preview3D printing
DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.
Tools & prototyping · 3D printing · 53 parts
10W Super Bright LED - Violet visual preview
10W Super Bright LED - Warm White visual preview
3-Pin LED Strip Connector Cable - Single Head (5PCS) visual preview
3-Pin LED Strip Connector Cable (5PCS) visual previewLED pixels
WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.
Components · Addressable LEDs · 176 parts
