USB Type C Socket - SMT Inline Breakout Board

Inline USB-C dual-row socket breakout with all pins exposed as SMT pads. No CC resistors included — resistors must be added externally for USB-C enumeration. Suited for custom cable harnesses.

A1 GNDA1
USB-C receptacle ground pad broken out to the SMT breakout. Adafruit product 4396 identifies the sold item as a USB Type C Socket SMT Inline Breakout Board, states it has the true dual-row USB-C connector and all pads broken out, and states there are no direction/current resistors, so this payload models only the standard USB-C receptacle pad breakout contract.
Type · ground
A2 TX1+A2
USB-C SuperSpeed transmit lane pad broken out to the SMT breakout. Adafruit product 4396 identifies the sold item as a USB Type C Socket SMT Inline Breakout Board, states it has the true dual-row USB-C connector and all pads broken out, and states there are no direction/current resistors, so this payload models only the standard USB-C receptacle pad breakout contract.
Type · data
A3 TX1-A3
USB-C SuperSpeed transmit lane pad broken out to the SMT breakout. Adafruit product 4396 identifies the sold item as a USB Type C Socket SMT Inline Breakout Board, states it has the true dual-row USB-C connector and all pads broken out, and states there are no direction/current resistors, so this payload models only the standard USB-C receptacle pad breakout contract.
Type · data
A4 VBUSA4

Connectors

228 other options

Passive adapters, 2.54 mm pin headers, terminal blocks, JST and barrel-jack connector pairs, RF antennas and microSD adapters. Mechanical fit between two connectors does not confirm voltage, pinout or protocol compatibility.

View all 228

SparkFun Qwiic Pro Micro BoogieBoard visual preview

Related groups

4 groups

Cables

Around 250 entries: JST SH/PH cable pairs, Grove and STEMMA QT/Qwiic leads, jumper wires, silicone hookup wire from 30 AWG to 8 AWG, and FPC ribbon cables. Ecosystem bridge cables exist for the PH-to-SH pitch mismatch.

Connectors & cables · Cables & wires · 261 parts

USB and serial

Passive USB cables plus passive USB cables, Micro-B and USB-C breakouts, CP2102 and FT232 USB-UART bridges, DIY cable assembly parts, and USB-C development boards. Data support, host/device role and logic voltage vary significantly across the group.

Connectors & cables · USB cables · 95 parts

3D printing

DFRobot 1.75 mm PLA in 1 kg spools makes up the bulk of the group, in over 15 colors. Specialty options include PVA in both diameters, NinjaFlex flexible filament, Proto-Pasta conductive PLA, and wood-fill. OverLord printer spares and OverLord printers round out the hardware side.

Tools & prototyping · 3D printing · 53 parts

LED pixels

WS2812/SK6812 NeoPixel strips, rings and Jewels, APA102 DotStar pixels, and plain analog RGB strips — each matched to its protocol and host, not just its connector.

Components · Addressable LEDs · 176 parts

Position

Type

Function

Voltage

A1 GND

ground

USB-C receptacle ground pad broken out to the SMT breakout. Adafruit product 4396 identifies the sold item as a USB Type C Socket SMT Inline Breakout Board, states it has the true dual-row USB-C connector and all pads broken out, and states there are no direction/current resistors, so this payload models only the standard USB-C receptacle pad breakout contract.

A2 TX1+

data

USB-C SuperSpeed transmit lane pad broken out to the SMT breakout. Adafruit product 4396 identifies the sold item as a USB Type C Socket SMT Inline Breakout Board, states it has the true dual-row USB-C connector and all pads broken out, and states there are no direction/current resistors, so this payload models only the standard USB-C receptacle pad breakout contract.

A3 TX1-

data

A4 VBUS

power

USB-C bus power pad broken out to the SMT breakout. Adafruit product 4396 identifies the sold item as a USB Type C Socket SMT Inline Breakout Board, states it has the true dual-row USB-C connector and all pads broken out, and states there are no direction/current resistors, so this payload models only the standard USB-C receptacle pad breakout contract.

USB VBUS, normally 5V before any USB-C power negotiation.

A5 CC1

data

USB-C configuration-channel pad broken out; Adafruit notes no resistors are populated to set direction/current. Adafruit product 4396 identifies the sold item as a USB Type C Socket SMT Inline Breakout Board, states it has the true dual-row USB-C connector and all pads broken out, and states there are no direction/current resistors, so this payload models only the standard USB-C receptacle pad breakout contract.

A6 D+

data

USB 2.0 D+ pad broken out to the SMT breakout. Adafruit product 4396 identifies the sold item as a USB Type C Socket SMT Inline Breakout Board, states it has the true dual-row USB-C connector and all pads broken out, and states there are no direction/current resistors, so this payload models only the standard USB-C receptacle pad breakout contract.

A7 D-

data

USB 2.0 D- pad broken out to the SMT breakout. Adafruit product 4396 identifies the sold item as a USB Type C Socket SMT Inline Breakout Board, states it has the true dual-row USB-C connector and all pads broken out, and states there are no direction/current resistors, so this payload models only the standard USB-C receptacle pad breakout contract.

A8 SBU1

data

USB-C sideband-use pad broken out to the SMT breakout. Adafruit product 4396 identifies the sold item as a USB Type C Socket SMT Inline Breakout Board, states it has the true dual-row USB-C connector and all pads broken out, and states there are no direction/current resistors, so this payload models only the standard USB-C receptacle pad breakout contract.

A9 VBUS

power

USB VBUS, normally 5V before any USB-C power negotiation.

A10 RX2-

A10

data

USB-C SuperSpeed receive lane pad broken out to the SMT breakout. Adafruit product 4396 identifies the sold item as a USB Type C Socket SMT Inline Breakout Board, states it has the true dual-row USB-C connector and all pads broken out, and states there are no direction/current resistors, so this payload models only the standard USB-C receptacle pad breakout contract.

A11 RX2+

A11

data

A12 GND

A12

ground

B1 GND

ground

B2 TX2+

data

B3 TX2-

data

B4 VBUS

power

USB VBUS, normally 5V before any USB-C power negotiation.

B5 CC2

data

B6 D+

data

B7 D-

data

B8 SBU2

data

B9 VBUS

power

USB VBUS, normally 5V before any USB-C power negotiation.

B10 RX1-

B10

data

B11 RX1+

B11

data

B12 GND

B12

ground

Pinout

Cables

USB and serial

3D printing

LED pixels